"Linux Gazette...making Linux just a little more fun!"

Contents:

• RE: Photogrammetry tools for Linux? in Issue 30
• Re: Suggestion for Article, simultaneous versions of Kernels
• Secondary IDE interface CDROM detection/automounting tip
• Re ext2 partitions
• pdf resumes: pdflatex
• Re: CHAOS
• Re: 3com network cards
• ext2 Partitions
• RE: Searching (somewhat in vain) for sources on shell scripting
• Re: $.02 tips on ext2 Partitions
• LG30 ext2 Partition tip
• Modem Connecting Speed
• Short Article on upgrading to SMP
• Cross-platform Text Conversions

RE: Photogrammetry tools for Linux? in Issue 30

In the July 1998 issue of LG, this message was listed in the "Help Wanted" section.

From: Maurizio Ferrari, Maurizio.Ferrari@tin.it
I am looking for a Linux program to do some close-range photogrammetry. Close range photogrammetry is a technique that enables to reconstruct 3D images from a series of 2D pictures. There are a few powerful (and relatively inexpensive) tools for Windows but none so far for Linux, that I know of. There was something once upon a time called Photo4D. Despite my massive Internet search, any occurrence of Photo4D seems to have been wipe erased from the face of earth. It is listed in SAL but all the links fail. I don't want to resort to buy and use Windows software for this. Help, anyone?

CompInt
712 Seyton Drive
Nepean, Ontario K2H 9R9
Canada
General e-mail : compint@igs.net
https:/www.igs.net/~compint/
This page updated 8/15/97 at 5:45:19 AM ET.

I found this article about the product on Computer Graphics World's site.

https://www.cgw.com/cgw/Archives/1996/09/09prod1_05.html

Product Spotlight
New Motion-Capture Tool
CGW Magazine - September 1996

With CompInt's Photo4D-Pro, animators can now capture 2D and 3D motion based on video recordings. The Windows 95/NT-based program, available for $490, features auto-detection and auto-marking tools which use pattern recognition technology to automatically detect and mark similar feature points in images, making it possible to effectively digitize a large number of points. The software enables users to capture accurate 3D motion from multiple video recordings of a subject by tracking the feature points in videos and computing their x, y, and z coordinates in each frame. Furthermore, its advanced algorithms can synchronize recorded videos to sub-frame accuracy, allowing the use of low-cost home video cameras.

Coinciding with this product launch, the company is also releasing Photo4D-Lite V2.0, a $99 product designed for users who require only 3D digitizing and modeling capabilities. Both products will be available on Windows 95/NT, SGI, Sun, HP, and Linux platforms. (Nepean, Ontario; 613-721-1643)

The web page that is listed is not valid, but hopefully this may help people trying to locate this product.

John

Re: Suggestion for Article, simultaneous versions of Kernels

From: Renato Weiner, reweiner@yahoo.com
Recently I was looking at the Gazette and I think I have a good suggestion of an article that will be very useful for the Linux community. I have had some technical difficulties of having two simultaneous versions of Kernels in my system. I mean a stable one and a developing one. I searched the net looking for information of how to co-exist both but it's completely fragmented. If somebody more experienced could put all this information together, it will certainly help a lot of people from kernels developers to end-users.

HOW TO HAVE COEXISTING KERNELS

First let me assume that, with "coexisting kernels", you meant to have several different kernels (with different kernel numbers such as 2.0.34 and 2.1.101) each of which can be chosen at boot time to be started. (The point is: I suppose, you don't want to simultaneously __run__ different kernels, which of course is impossible.)

So, all you have to do is this:

For each kernel you want to use, get the kernel sources, e.g. as .tgz file, cd to /usr/src, do a

 
  tar xzf ../where/ever/it/is/package.tgz

 
  make config  (or menuconfig or xconfig, whatever you like)
  make zImage modules modules_install
  cp arch/i386/boot/zImage /linux-2.0.34  (e.g.)

Then edit the /etc/lilo.conf. Copy the parts that configure your "normal" system start and change the name of the configuration. Also change the name of the kernel binary to /linux-2.0.34 (e.g.).

Then proceed with the next kernel in identic behaviour. Nothing can be overwritten during this process, because all of the kernel compilation is done in its separate directory /usr/src/linux-2.x.y, and all the generated modules will be put in a separate directory /lib/modules/2.x.y, and your zImage copy (residing in /) will have a new name, as you have used an other kernel version.

When you're through with all your kernel versions and have added the last portion to the /etc/lilo.conf file do a

 
  lilo

Hope it helps,

H.-G. Esser

Secondary IDE interface CDROM detection/automounting tip

In the Linux Gazette #28 the question was asked:
Hello.I have the Linux Slackware 2.0.30 Walnut Creek.I installed it on a Pentium 200 MMX with a 24x CD-ROM. During the installation I had to write "ramdisk hdd=cdrom" for reading the CD-ROM, but after the installation Linux doesn't see the CD-ROM. I have an atapi CD-ROM, and when I tried to compile my kernel another time, I saw that atapi is the default !!! So I don't understand where is the problem . What can I do?

Jim Reith reith@racores.com

Re ext2 partitions

A much simpler solution to Albert T. Croft's file finding troubles of only wanting to look at ext2 drives so as to exclude the vfat partitions is:

 
find . -fstype ext2 -name foo

Cheers, Alex.

pdf resumes: pdflatex

Dave Cook, the man who wrote the 2cent tip about createing a .pdf file of a resume, must not have the latest TeTeX installed. Either that, or he's not explored it much. ;-)

There is a `pdflatex' now, that creates .pdf files directly. It works really well. There is also `pdftex', and `pdftexinfo'. You can typeset texinfo documents with `info2pdf' now.

Last time I tried it, there was an off by one bug, apparently... When you click a section heading in the table of contents panel, it would jump to one section lower than the one you click. The bug has been reported to the Debian bug tracking system.

Karl

Re: CHAOS

A point to note: the IP addresses used for the network should probably be modified to be in one of the ranges set aside in RFC 1918. In summary, they are:

 
     10.0.0.0        -   10.255.255.255  (10/8 prefix)
     172.16.0.0      -   172.31.255.255  (172.16/12 prefix)
     192.168.0.0     -   192.168.255.255 (192.168/16 prefix)

Dom Mitchell

Re: 3com network cards

Re: complaint about 3com network card being slow in 2c tips.

3com 3c590 3c900 and 3c905 cards have a setting stored into them. Unlike traditional settings like IO port , Interrupt, or media type, these cards just take one setting ...

They actually have a setting that slows down the card so that the CPU time isnt chewed up with a flood of network traffic.

There is also a maximum throughput setting and a medium setting.

leon

ext2 Partitions

In your 30th issue, Albert Croft wrote in with a script to search only ext2 partitions. I believe you can do the same thing by using

 
find / -fstype ext2

RE: Searching (somewhat in vain) for sources on shell scripting

Well, my 2 sec search turned this up. In addition, www.oreilly.com is the only site you need for the definitive source on anything related to Unix.

Unix Shell Programming Revised Ed.
Kochan, Stephen G.; Wood, Patrick H.
0-672-48448-X
Hayden Books

Korn Shell Programming Tutorial
Rosenberg, Barry
0-201-56324-X
Addison Wesley

AWK Language Programming; A User's Guide for GNU AWK
Robbins, Arnold D.
1-882114-26-4
Free Software Foundation

Learning Perl, 2nd Edition
2nd Edition July 1997
Randal L. Schwartz & Tom Christiansen Foreword by Larry Wall
1-56592-284-0
302 pages, $29.95

Programming Perl, 2nd Edition
Larry Wall, Tom Christiansen & Randal L. Schwartz
2nd Edition September 1996
1-56592-149-6
670 pages, $39.95

Advanced Perl Programming
By Sriram Srinivasan
1st Edition August 1997
1-56592-220-4
434 pages, $34.95

Paul

Re: $.02 tips on ext2 Partitions

In the July 1998 issue of Linux Gazette, Albert T. Croft said:
We knew the files we were looking for would only be on the ext2 partitions. We tried writing a batch file, using grep and gawk to get the mount points for the ext2 partitions and handing them to find. This proved unworkable if we were looking for patterns, such as h2*. We then tried to write just a find command, using gawk and grep to get the mount points. This was somewhat better, but using a print statement in gawk to get the names of the mount points wouldn't work. Some help came with remembering that gawk has a printf statement,allow. Our final product, which we found quite useful and now have in our .bashrc > files as linuxfind, is the following:
find `mount|grep ext2|gawk '{printf "%s ", $3}'` -name

 
	find `mount -t ext2` -name

locate searches one or more databases of file names and displays the file names that contain the pattern.

Paul

LG30 ext2 Partition tip

Thanks for your tip which I saw in the Linux Gazette.

I think you may want to add the -mount switch to your command line though.

That way find won't go onto other filesystems except those listed.

Since on my system, / is ext2 and /hdd/c is vfat, without the mount switch, find *WOULD* search the vfat partitions too. The mount switch limits it to those partitions which you list with your grep/gawk combination

Hope that helps.

Modem Connecting Speed

What speed is my modem connecting at ?

Got a new 56K modem and wondering how it's doing ? Fed up with seeing "115200" ?

(This assumes Red Hat 5.0)...

Edit /etc/sysconfig/network-scripts/chat-ppp1 (or whatever chat file you use) Insert a line:

 
'REPORT' 'CONNECT'

Change this line:

 
connect "/usr/sbin/chat $chatdbg -f $CHATSCRIPT"

 
connect "/usr/sbin/chat $chatdbg -f $CHATSCRIPT" 2>/dev/console

 
connect "/usr/sbin/chat $chatdbg -r /var/log/modem-speed -f $CHATSCRIPT"

You'll see entries like:

 
chat:  Jul 22 22:31:06 CONNECT 52000/ARQ/V90/LAPM/V42BIS

NP

Short Article on upgrading to SMP

My son and I upgraded to an SMP machine this last weekend. We encountered some problems, and thought it might make an interesting short article. Use it if you can :).

About a month ago, I acquired two 4.3GB UW SCSI drives from IBM. At the time, I was running an old Adaptec 1542 SCSI card (with no problems I might add), but it does not support Ultra Wide, and it was an ISA card. In the process of looking at PCI Ultra Wide SCSI Cards (I was going to purchase an Adaptec 2940UW since I had some experience with them), I came across a Micronics W6-LI motherboard, dual Pentium Pro, with builtin Adaptec AIC7880 SCSI UW chip. This is the story of that project.

My son and I started at 8:00 Saturday morning. We took my existing ATX machine, which housed an Intel VS440 motherboard, 2GB IDE drive, 2GB SCSI drive, and SCSI cdrom apart. We removed everything - Motherboard, Drives, Powersupply, etc. This is because the Micronics board is big, and we wanted as few obstructions as possible while we put the motherboard in. We put the motherboard, two 4.3GB UW drives, CDROM, and powersupply back in. I only needed the data from the IDE drive, so we hooked that up also, but did not install it in the case. We booted into the bios, and set a few things, including setting it to use the MP1.4 spec. We inserted the Slackware 3.4 boot and root disks, and it booted just fine. The hardware portion was a snap.

We set up the partitions on the two UW drives, and copied the data from the IDE drive to a partition on the frist UW drive. We then started the installation of Linux. We installed the Slackware 3.4, with kernel 2.0.30. This went well. We booted, and this came up. We were anxious to try SMP, so we compiled a kernel with SMP, and this was where the problems started. The machine would hang after running about a minute in SMP mode. We decided to download a newer kernel, so we tried 2.0.34. There is apparently a nasty bug in 2.0.34 on SMP machines. The SCSI chip could not be reset, and was looping trying to do this. We also tried 2.0.35, with no luck. This behaviour happened whether we compiled for single or multiple processor. The next step was to try a development kernel (this was the first time for me). We downloaded 2.1.107, and installed it. We also found that to use this kernel, we need updated binutils, modutils, libc, ld.so, procps, procinfo, and mount. The upshot of this was, that 17 hours after we started, we had a running multiprocessor machine.

Some things to keep in mind:

• SMP is turned on by uncommenting the SMP=1 line in the kernel Makefile (this was unnecessary in the developement kernel - it was on by default)
• Have as many things downloaded as you can think of. It never occurred to me that it would be handy to have some newer kernels already on the hard drive.
• Read the doc for the development kernels carefully - we missed some of the software that needed to be upgraded.
• Starting with 2.1.102 development kernel, IP Masquerading was changed. The doc for the new IPCHAINS program is at https://www.adelaide.net.au/~rustcorp/ipfwchains

Cross-platform Text Conversions

Well, I had some text files that I needed to convert from UNIX to DOS format. Downloaded the 'unix2dos' program ... and discovered to my horror that it was an A.OUT BINARY! Thought they'd purged all of those from the archives ;-) But seriously, I couldn't run the program, so I came up with a Tcl script to do the job. It can convert text files in any direction between UNIX, DOS and Mac formats. It has only been tested w/ Tcl 8.0, but since it's very simple, I imagine it'll work with earlier versions too. It has a small bug: when converting from DOS format, it adds one extra newline at the end of the file.

Why Tcl? Well ...

• I'm sure it's possible to do these conversions with sed or even bash; it might even be simple once you know the trick. But after several hours of reading man pages and experimenting, I couldn't figure out how.
• Didn't feel like dusting off my old Perl book.
• Tcl is cool.
• It turned out to be really easy to do this in Tcl.

1. If necessary, edit the pathname for tclsh.
2. Save it wherever you want to, with any name (I call it textconv.tcl), and make it executable.
3. symlink it to any or all of the following names, depending on which conversions you want to do, in a directory in $PATH:

   d2m	d2u	m2d	m2u	u2d	u2m
   

   These names must be exactly as shown in order for the script to work.
4. To use, type the appropriate command with a source file and destination file as arguments. For example, to convert a Mac text file to UNIX format:

   $ m2u macintosh.txt unix.txt
   

------ cut below this line ------------------------------
#!/usr/bin/tclsh

# capture the command name that invoked us and the
# source and destination filenames
set convtype $argv0
set infile [lindex $argv 0]
set outfile [lindex $argv 1]

set inchannel [open $infile "r"]
set outchannel [open $outfile "w"]

# according to the command name, set the end-of-line
# and end-of-file characters to the appropriate values
switch -glob -- $convtype {

    *2d {
	fconfigure $outchannel -translation "crlf" -eofchar "\x1a"
    }

    *2m {
	fconfigure $outchannel -translation cr
    }

    *2u {
 	fconfigure $outchannel -translation lf -eofchar ""
    }

    default {
	error "Invalid command name. This script must be \n\
invoked through a symbolic link with\n one of the following \
names:\n d2m, d2u, m2d, m2u, u2d, or u2m."
    }
    
}

while {[gets $inchannel line] >= 0} {

    # if converting from DOS, lose the end-of-file character
    if {[string match "*d2*" $convtype]} {
	set line [string trimright $line "\x1a"]
    }

    puts $outchannel $line

}

close $inchannel
close $outchannel
#------------ end Tcl script--------------------------------

This page maintained by the Editor of Linux Gazette, gazette@linuxgazette.net
Copyright © 1998 Specialized Systems Consultants, Inc.