#!/bin/sh
#
# IPCHAINS-FIREWALL V1.6-STANDALONE
#
# -------------------------------------------------- Ipchains Firewall Script -
#
# Original script by Ian Hall-Beyer (manuka@nerdherd.net)
#
# Contributors:
# terminus (cpm@dotquad.com) (ICQ & DHCP, @home testing)

# ---------------------------------------------------------------- Interfaces -
# Local Interface
# This is the interface that is your link to the world

LOCALIF="ppp0"

# ------------------------------------------------------- Variable definition -
#
# Set the location of ipchains.

IPCHAINS="/sbin/ipchains"

# You shouldn't need to change anything in the rest of this section

LOCALIP=`ifconfig $LOCALIF | grep inet | cut -d : -f 2 | cut -d \  -f 1`
LOCALMASK=`ifconfig $LOCALIF | grep Mask | cut -d : -f 4`
LOCALNET="$LOCALIP/$LOCALMASK"

echo "IP: $LOCALNET"

REMOTENET="0/0"

# -------------------------------------- Flush everything, start from scratch -

echo -n "Flushing rulesets.."

# Incoming packets from the outside network
$IPCHAINS -F input
echo -n "."

# Outgoing packets from the internal network
$IPCHAINS -F output   
echo -n "."

echo "Done!"

# -------------------------------------------------- Allow loopback interface -

echo -n "Loopback.."

$IPCHAINS -A input -i lo -s 0/0 -d 0/0 -j ACCEPT
$IPCHAINS -A output -i lo -s 0/0 -d 0/0 -j ACCEPT
echo -n ".."

echo "Done!"

# ----------------------------------Set telnet, www and FTP for minimum delay -
# This section manipulates the Type Of Service (TOS) bits of the 
# packet. For this to work, you must have CONFIG_IP_ROUTE_TOS enabled
# in your kernel

echo -n "TOS flags.."

$IPCHAINS -A output -p tcp -d 0/0 www -t 0x01 0x10
$IPCHAINS -A output -p tcp -d 0/0 telnet -t 0x01 0x10   
$IPCHAINS -A output -p tcp -d 0/0 ftp -t 0x01 0x10
echo -n "..."

# Set ftp-data for maximum throughput
$IPCHAINS -A output -p tcp -d 0/0 ftp-data -t 0x01 0x08
echo -n "."

echo "Done!"

# ---------------------------------------------------------- Trusted Networks -
# Add in any rules to specifically allow connections from hosts/nets that
# would otherwise be blocked.

# echo -n "Trusted Networks.."

# $IPCHAINS -A input -s [trusted host/net] -d $LOCALNET <ports> -j ACCEPT 
# echo -n "."

# echo "Done!"

# ----------------------------------------------------------- Banned Networks -
# Add in any rules to specifically block connections from hosts/nets that
# have been known to cause you problems. These packets are logged.

# echo -n "Banned Networks.."

# This one is generic
# $IPCHAINS -A input -l -s [banned host/net] -d $LOCALNET <ports> -j DENY
# echo -n "."

# This one blocks ICMP attacks
# $IPCHAINS -A input -l -b -i $LOCALIF -p icmp -s [host/net] -d $LOCALNET -j DENY
# echo -n "."

# echo "Done!"

# ------------------------------------------------------ @home-specific rules -
# This @home stuff is pretty specific to me (terminus).  I get massive port
# scans from my neighbors and from pokey admins at @home, so I just got harsh
# and blocked all their stuff, with a few exceptions, listed below.
#
# If someone out there finds out the ip ranges of JUST tci@home, let me know
# so i don't end up blocking ALL cablemodems like it's doing now.

echo -n "Cable Modem Nets.."

# so we can check mail, use the proxy server, hit @home's webpage.
# you will want to set these to your local servers, and uncomment them

# $IPCHAINS -A input -p tcp -s ha1.rdc1.wa.home.com -d $LOCALNET 1023:65535 -j ACCEPT
# $IPCHAINS -A input -p tcp -s mail.tcma1.wa.home.com -d $LOCALNET 1023:65535 -j ACCEPT
# $IPCHAINS -A input -p tcp -s www.tcma1.wa.home.com -d $LOCALNET 1023:65355 -j ACCEPT
# $IPCHAINS -A input -p tcp -s proxy.tcma1.wa.home.com -d $LOCALNET 1023:65535  -j ACCEPT
# echo -n "...."

# so we can resolve the above hostnames, allow dns queries back to us
# $IPCHAINS -A input -p tcp -s ns1.home.net -d $LOCALNET 1023:65535 -j ACCEPT
# $IPCHAINS -A input -p tcp -s ns2.home.net -d $LOCALNET 1023:65535 -j ACCEPT
# $IPCHAINS -A input -p udp -s ns1.home.net -d $LOCALNET 1023:65535 -j ACCEPT
# $IPCHAINS -A input -p udp -s ns2.home.net -d $LOCALNET 1023:65535 -j ACCEPT
# echo -n ".."

# linux ipchains building script page (I think)
# $IPCHAINS -A input -p tcp -s 24.128.61.117 -d $LOCALNET 1023:65535 -j  ACCEPT
# echo -n "."

# Non-@home users may want to leave this uncommented, just to block all
# the wannabe crackers. Add any @home hosts you want to allow BEFORE this line.

# Blast all other @home connections into infinity and log them.
$IPCHAINS -A input -l -s 24.0.0.0/8 -d $LOCALNET -j DENY
echo -n "."

echo "Done!"

# ---------------------------- Specific port blocks on the external interface -
# This section blocks off ports/services to the outside that have
# vulnerabilities. This will not affect the ability to use these services
# within your network. 

echo -n "Port Blocks.."
 
# NetBEUI/Samba
$IPCHAINS -A input -p tcp -s $REMOTENET -d $LOCALNET 139 -j DENY
$IPCHAINS -A input -p udp -s $REMOTENET -d $LOCALNET 139 -j DENY
echo -n "."

# Microsoft SQL
$IPCHAINS -A input -p tcp -s $REMOTENET -d $LOCALNET 1433 -j DENY
$IPCHAINS -A input -p udp -s $REMOTENET -d $LOCALNET 1433 -j DENY
echo -n "."

# Postgres SQL

$IPCHAINS -A input -p tcp -s $REMOTENET -d $LOCALNET 5432 -j DENY
$IPCHAINS -A input -p udp -s $REMOTENET -d $LOCALNET 5432 -j DENY
echo -n "."

# Network File System
$IPCHAINS -A input -p tcp -s $REMOTENET -d $LOCALNET 2049 -j DENY
$IPCHAINS -A input -p udp -s $REMOTENET -d $LOCALNET 2049 -j DENY
echo -n "."

# X Displays :0-:2-
$IPCHAINS -A input -p tcp -s $REMOTENET -d $LOCALNET 5999:6003 -j DENY
$IPCHAINS -A input -p udp -s $REMOTENET -d $LOCALNET 5999:6003 -j DENY
echo -n "."

# X Font Server :0-:2-
$IPCHAINS -A input -p tcp -s $REMOTENET -d $LOCALNET 7100 -j DENY
$IPCHAINS -A input -p udp -s $REMOTENET -d $LOCALNET 7100 -j DENY
echo -n "."

# Back Orifice (logged)
$IPCHAINS -A input -l -p tcp -s $REMOTENET -d $LOCALNET 31337 -j DENY
$IPCHAINS -A input -l -p udp -s $REMOTENET -d $LOCALNET 31337 -j DENY
echo -n "."

# NetBus (logged)
$IPCHAINS -A input -l -p tcp -s $REMOTENET -d $LOCALNET 12345:12346 -j DENY
$IPCHAINS -A input -l -p udp -s $REMOTENET -d $LOCALNET 12345:12346 -j DENY
echo -n "."

echo "Done!"

# --------------------------------------------------- High Unprivileged ports -
# These are opened up to allow sockets created by connections allowed by 
# ipchains

echo -n "High Ports.."

$IPCHAINS -A input -p tcp -s $REMOTENET -d $LOCALNET 1023:65535 -j ACCEPT
$IPCHAINS -A input -p udp -s $REMOTENET -d $LOCALNET 1023:65535 -j ACCEPT
echo -n "."

echo "Done!"

# ------------------------------------------------------------ Basic Services -

echo -n "Services.."

# ftp-data (20) and ftp (21)
# $IPCHAINS -A input -p tcp -s $REMOTENET -d $LOCALNET 20 -j ACCEPT
# $IPCHAINS -A input -p tcp -s $REMOTENET -d $LOCALNET 21 -j ACCEPT
# echo -n ".."

# ssh (22)
# $IPCHAINS -A input -p tcp -s $REMOTENET -d $LOCALNET 22 -j ACCEPT
# echo -n "."

# telnet (23)
# $IPCHAINS -A input -p tcp -s $REMOTENET -d $LOCALNET 23 -j ACCEPT
# echo -n "."

# smtp (25)
# $IPCHAINS -A input -p tcp -s $REMOTENET -d $LOCALNET 25 -j ACCEPT
# echo -n "."

# DNS (53)
$IPCHAINS -A input -p tcp -s $REMOTENET -d $LOCALNET 53 -j ACCEPT
$IPCHAINS -A input -p udp -s $REMOTENET -d $LOCALNET 53 -j ACCEPT
echo -n ".."

# DHCP on LAN side (to make @Home DHCP work) (67/68)
# $IPCHAINS -A input -i $LOCALIF -p udp -s $REMOTENET -d 255.255.255.255/24 67 -j ACCEPT
# $IPCHAINS -A output -i $LOCALIF -p udp -s $REMOTENET -d 255.255.255.255/24 68 -j ACCEPT
# echo -n ".."

# http (80)
# $IPCHAINS -A input -p tcp -s $REMOTENET -d $LOCALNET 80 -j ACCEPT
# echo -n "."

# POP-3 (110)
# $IPCHAINS -A input -p tcp -s $REMOTENET -d $LOCALNET 110 -j ACCEPT
# echo -n "."

# identd (113)
# $IPCHAINS -A input -p tcp -s $REMOTENET -d $LOCALNET 113 -j ACCEPT
# echo -n "."

# nntp (119)
# $IPCHAINS -A input -p tcp -s $REMOTENET -d $LOCALNET 119 -j ACCEPT
# echo -n "."

# https (443)
# $IPCHAINS -A input -p tcp -s $REMOTENET -d $LOCALNET 443 -j ACCEPT
# echo -n "."

# ICQ Services (it's a server service) (4000)
# $IPCHAINS -A input -p tcp -s $REMOTENET -d $LOCALNET 4000 -j ACCEPT
# echo -n "."

echo "Done!"

# ---------------------------------------------------------------------- ICMP -

echo -n "ICMP Rules.."

# Use this to deny ICMP attacks from specific addresses
# $IPCHAINS -A input -b -i $EXTERNALIF -p icmp -s <address> -d 0/0 -j DENY
# echo -n "."

# Allow incoming ICMP
$IPCHAINS -A input -p icmp -s $REMOTENET -d $LOCALNET -j ACCEPT
$IPCHAINS -A input -p icmp -s $REMOTENET -d $LOCALNET -j ACCEPT
echo -n ".."

# Allow outgoing ICMP
$IPCHAINS -A output -p icmp -s $LOCALNET -d $REMOTENET -j ACCEPT
$IPCHAINS -A output -p icmp -s $LOCALNET -d $REMOTENET -j ACCEPT
echo -n "...."

echo "Done!"

# -------------------------------------------------------- set default policy -

$IPCHAINS -A input -j DENY
$IPCHAINS -A output -j ACCEPT

echo ""
echo "Finished Establishing Firewall."