...making Linux just a little more fun!
Savill, Owen [Owen.Savill at analog.com]
Mon, 5 Feb 2007 13:03:31 -0000
Hello Answer Gang,
This is my first time posting to you so I hope I get it right.
I am having big issues with my WiFi connectivity. Basically everything seems to be okay but attempting to ping an address results in a network unreachable message. I've used drakconnect to setup the wireless setup. The router itself is reporting the card as attached ! And ifconfig shows a continuous stream of traffic to the card but nothing from it.
The contents of /var/messages looks fine, apart from perhaps the last line:
Jan 5 08:49:10 localhost kernel: pccard: CardBus card inserted into slot 0 Jan 5 08:49:10 localhost kernel: PCI: Enabling device 0000:03:00.0 (0000 -> 0002) Jan 5 08:49:10 localhost kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Jan 5 08:49:10 localhost kernel: Build date: Jan 4 2007 Jan 5 08:49:10 localhost kernel: Debugging version (IEEE80211) Jan 5 08:49:10 localhost kernel: ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps Jan 5 08:49:10 localhost kernel: ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps Jan 5 08:49:10 localhost kernel: ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps Jan 5 08:49:10 localhost kernel: ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps Jan 5 08:49:10 localhost kernel: ath0: H/W encryption support: WEP AES AES_CCM TKIP Jan 5 08:49:10 localhost kernel: ath0: mac 5.9 phy 4.3 radio 3.6 Jan 5 08:49:10 localhost kernel: ath0: Use hw queue 1 for WME_AC_BE traffic Jan 5 08:49:10 localhost kernel: ath0: Use hw queue 0 for WME_AC_BK traffic Jan 5 08:49:10 localhost kernel: ath0: Use hw queue 2 for WME_AC_VI traffic Jan 5 08:49:10 localhost kernel: ath0: Use hw queue 3 for WME_AC_VO traffic Jan 5 08:49:10 localhost kernel: ath0: Use hw queue 8 for CAB traffic Jan 5 08:49:10 localhost kernel: ath0: Use hw queue 9 for beacons Jan 5 08:49:10 localhost kernel: Debugging version (ATH) Jan 5 08:49:10 localhost kernel: ath0: Atheros 5212: mem=0xd2000000, irq=11 Jan 5 08:49:12 localhost dhclient: DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 3 Jan 5 08:49:15 localhost dhclient: DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 3 Jan 5 08:49:18 localhost dhclient: DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 8 Jan 5 08:49:26 localhost dhclient: DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 8 Jan 5 08:49:28 localhost snmpd[3498]: netsnmp_assert index == tmp failed if-mib/data_access/interface.c:467 _access_interface_entry_save_name()Kernel logs are at the end of this message...
Basically if never configures an inet address and I guess this is the real problem:
ath0 Link encap:Ethernet HWaddr 00:05:5D:9F:C2:06 inet6 addr: fe80::205:5dff:fe9f:c206/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6 errors:123 dropped:0 overruns:0 frame:123 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:200 RX bytes:1062 (1.0 KiB) TX bytes:1780 (1.7 KiB) Interrupt:11 Memory:e0cc0000-e0cd0000The kernel modules appear there:
ath_pci 71868 0 ath_rate_sample 14408 1 ath_pci wlan 128028 4 wlan_wep,ath_pci,ath_rate_sample ath_hal 147536 3 ath_pci,ath_rate_samplethe correct LEDs are flashing on the card and the router shows the device as conected.
I have tried the following entries in modprobe.conf:
alias wlan ath0 alias wlan0 ath0 alias wifi0 ath0but still nothing.
iwconfig gives:
lo no wireless extensions. sit0 no wireless extensions. eth0 no wireless extensions. ath0 IEEE 802.11g ESSID:"***" Nickname:"localhost" Mode:Managed Frequency:2.467 GHz Access Point: 00:0F:B5:15:5D:AA Bit Rate:54 Mb/s Tx-Power:18 dBm Sensitivity=0/3 Retry:off RTS thr:off Fragment thr:off Encryption key:7077-456A-6657-7261-656D-6376-51 Security mode:open Power Management:off Link Quality=38/94 Signal level=-57 dBm Noise level=-95 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0ifup ath0 gives:
Determining IP information for ath0... ... pause for at least a minute ... Determining IP information for ath0... failed.There is also in onboard ethernet card, through which I am talking now. I've booted the system using the Mandriva Flash drive and it's the same. I have built my own MadWiFi kernal modules and this method worked fine in 10.1 and Mand 2006 (the Mandriva 2007 supplied ones fail to load !!).
I have tried a SuSE 10 installation and this works just fine straight out of the box !
Sadly I need Mand 2007 due to h/w issues with the other distributions.
Can anyone shed any light on this ?
Many thanks, I hope you can help Owen
Kernel logs follow:
errors - nothing warnings: Jan 5 08:01:48 localhost kernel: ath_hal: module license 'Proprietary' taints kernel. Jan 5 08:01:49 localhost kernel: ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 Jan 5 08:01:57 localhost kernel: ip_tables: (C) 2000-2006 Netfilter Core Team Jan 5 08:01:57 localhost kernel: process `snmpd' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead. Jan 5 08:01:58 localhost kernel: Netfilter messages via NETLINK v0.30. Jan 5 08:01:58 localhost kernel: ip_conntrack version 2.4 (4091 buckets, 32728 max) - 224 bytes per conntrack Jan 5 08:02:34 localhost kernel: PCI: Enabling device 0000:03:00.0 (0000 -> 0002) Jan 5 08:02:34 localhost kernel: Build date: Jan 4 2007 Jan 5 08:02:34 localhost kernel: Debugging version (IEEE80211) Jan 5 08:02:34 localhost kernel: ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps Jan 5 08:02:34 localhost kernel: ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps Jan 5 08:02:34 localhost kernel: ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps Jan 5 08:02:34 localhost kernel: ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps Jan 5 08:02:34 localhost kernel: ath0: H/W encryption support: WEP AES AES_CCM TKIP Jan 5 08:02:34 localhost kernel: ath0: mac 5.9 phy 4.3 radio 3.6 Jan 5 08:02:34 localhost kernel: ath0: Use hw queue 1 for WME_AC_BE traffic Jan 5 08:02:34 localhost kernel: ath0: Use hw queue 0 for WME_AC_BK traffic Jan 5 08:02:34 localhost kernel: ath0: Use hw queue 2 for WME_AC_VI traffic Jan 5 08:02:34 localhost kernel: ath0: Use hw queue 3 for WME_AC_VO traffic Jan 5 08:02:34 localhost kernel: ath0: Use hw queue 8 for CAB traffic Jan 5 08:02:34 localhost kernel: ath0: Use hw queue 9 for beacons Jan 5 08:02:34 localhost kernel: Debugging version (ATH) Jan 5 08:05:39 localhost kernel: mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x1000000 Jan 5 08:16:26 localhost last message repeated 3 times Jan 5 08:26:39 localhost last message repeated 3 times Jan 5 08:30:16 localhost last message repeated 3 times Jan 5 08:31:50 localhost last message repeated 3 times Jan 5 08:34:57 localhost last message repeated 6 times Jan 5 08:38:15 localhost last message repeated 3 times Jan 5 08:38:15 localhost last message repeated 2 times Jan 5 08:49:10 localhost kernel: PCI: Enabling device 0000:03:00.0 (0000 -> 0002) Jan 5 08:49:10 localhost kernel: Build date: Jan 4 2007 Jan 5 08:49:10 localhost kernel: Debugging version (IEEE80211) Jan 5 08:49:10 localhost kernel: ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps Jan 5 08:49:10 localhost kernel: ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps Jan 5 08:49:10 localhost kernel: ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps Jan 5 08:49:10 localhost kernel: ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps Jan 5 08:49:10 localhost kernel: ath0: H/W encryption support: WEP AES AES_CCM TKIP Jan 5 08:49:10 localhost kernel: ath0: mac 5.9 phy 4.3 radio 3.6 Jan 5 08:49:10 localhost kernel: ath0: Use hw queue 1 for WME_AC_BE traffic Jan 5 08:49:10 localhost kernel: ath0: Use hw queue 0 for WME_AC_BK traffic Jan 5 08:49:10 localhost kernel: ath0: Use hw queue 2 for WME_AC_VI traffic Jan 5 08:49:10 localhost kernel: ath0: Use hw queue 3 for WME_AC_VO traffic Jan 5 08:49:10 localhost kernel: ath0: Use hw queue 8 for CAB traffic Jan 5 08:49:10 localhost kernel: ath0: Use hw queue 9 for beacons Jan 5 08:49:10 localhost kernel: Debugging version (ATH) info: Jan 5 08:49:10 localhost kernel: pccard: CardBus card inserted into slot 0 Jan 5 08:49:10 localhost kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Jan 5 08:49:10 localhost kernel: ath0: Atheros 5212: mem=0xd2000000, irq=11 Jan 5 08:49:21 localhost kernel: ath0: no IPv6 routers present /etc/sysconfig/network-scripts/ifcfg-ath0 DEVICE=ath0 BOOTPROTO=dhcp IPADDR=192.168.0.3 NETMASK=255.255.255.0 NETWORK=192.168.0.0 BROADCAST=192.168.0.255 GATEWAY=192.168.0.1 ONBOOT=yes METRIC=35 MII_NOT_SUPPORTED=yes USERCTL=no MS_DNS1=192.168.0.1 RESOLV_MODS=yes WIRELESS_MODE=Managed WIRELESS_ESSID=*** WIRELESS_ENC_KEY="open s:***" IPV6INIT=no IPV6TO4INIT=no DHCP_CLIENT=dhclient NEEDHOSTNAME=yes PEERDNS=yes PEERYP=no PEERNTPD=no
Kapil Hari Paranjape [kapil at imsc.res.in]
Mon, 5 Feb 2007 11:06:08 -0800
Hello,
On Mon, 05 Feb 2007, Savill, Owen wrote:
> This is my first time posting to you so I hope I get it right.
I think you may have erred a little on the side of too much info
> I am having big issues with my WiFi connectivity. Basically everything > seems to be okay but attempting to ping an address results in a network > unreachable message.
This is because your DHCP failed (see below).
> The router itself is reporting the card as attached ! And ifconfig shows > a continuous stream of traffic to the card but nothing from it.
This just means that the packets are being sent and received---but cannot be IP packets since your card did not acquire an IP address.
Here is the DHCP failure (or rather, DHCP lack of success)
> Jan 5 08:49:12 localhost dhclient: DHCPDISCOVER on ath0 to > 255.255.255.255 port 67 interval 3 > Jan 5 08:49:15 localhost dhclient: DHCPDISCOVER on ath0 to > 255.255.255.255 port 67 interval 3 > Jan 5 08:49:18 localhost dhclient: DHCPDISCOVER on ath0 to > 255.255.255.255 port 67 interval 8 > Jan 5 08:49:26 localhost dhclient: DHCPDISCOVER on ath0 to > 255.255.255.255 port 67 interval 8
> Basically if never configures an inet address and I guess this is the > real problem:
You've got it.
Your iwconfig output was:
> ath0 IEEE 802.11g ESSID:"***" Nickname:"localhost" > Mode:Managed Frequency:2.467 GHz Access Point: 00:0F:B5:15:5D:AA > Bit Rate:54 Mb/s Tx-Power:18 dBm Sensitivity=0/3 > Retry:off RTS thr:off Fragment thr:off > Encryption key:7077-456A-6657-7261-656D-6376-51 Security mode:open > Power Management:off > Link Quality=38/94 Signal level=-57 dBm Noise level=-95 dBm > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 > Tx excessive retries:0 Invalid misc:0 Missed beacon:0
Is this output essentially the same as you get when you manage to connect successfully with SUSE 10 as you said below?
> I have tried a SuSE 10 installation and this works just fine straight > out of the box !
Did you send this mail to the Mandriva mailing lists? I hope you
didn't get flamed out of existence
Hope this helps.
Regards,
Kapil. --
Kapil Hari Paranjape [kapil at imsc.res.in]
Mon, 5 Feb 2007 15:21:57 -0800
Dear Owen,
On Mon, 05 Feb 2007, Savill, Owen wrote:
> Many thanks for getting back. It's really good when someone actually > replies.
Could you please foward your reply to the mailing list?
There are a number of reasons why:
1. The question/answer is meant to help the community as a whole. 2. There is a good likelihood that I will miss some point which the rest of the community will not miss.Regards,
Kapil. --
OS [osavill at uklinux.net]
Tue, 6 Feb 2007 11:28:19 +0000
[[[ Edited from original top-posted format. - Kat ]]]
On Monday 05 February 2007 23:21, Kapil Hari Paranjape wrote:
> Dear Owen, > > Could you please foward your reply to the mailing list? >Sorry, of course.
OS [osavill at uklinux.net]
Tue, 6 Feb 2007 11:36:06 +0000
Hello Kapil,
Many thanks for getting back. It's really good when someone actually replies.
> Is this output essentially the same as you get when you > manage to connect successfully with SUSE 10 as you said below?Good question - I'll check tonight.
> Did you send this mail to the Mandriva mailing lists? I hope > you didn't get flamed out of existenceI've dealt with the pre Novell Gnome, gNumeric and Evolution lot, Mandriva haven't even started on the flame ladder yet ! My relationship with Mandriva Cooker is now non-existent ! Basically I think they think I'm an irritating twit ! They no longer even reply to my posts; is this better than being flamed ? The Mandriva bug I filed hasn't been responded to. The most helpful has been the Mandriva Forums but the people who have so far looked at the posting have offered little in the way of actual help.
> Hope this helps.Not yet
Thanks, Owen
OS [osavill at uklinux.net]
Tue, 6 Feb 2007 11:36:51 +0000
Hello Kapil,
I could only get to my Mandriva 2006 partition which connects just fie. The iwconfig is the same except the Encryption key: is different !! I presume this is expected or the router would have denied access.
I also noted that in Mand 2007 the ath0 i/f is immediately assigned and inet6 address. In Mand 2006 it is never assigned and inet6 address.
If have installed dhcp-common and dhcp-client from Mand 2006 but still nothing.
** sigh **
Thanks, Owen
Kapil Hari Paranjape [kapil at imsc.res.in]
Mon, 5 Feb 2007 21:20:37 -0800
Hello,
On Tue, 06 Feb 2007, OS wrote:
> I also noted that in Mand 2007 the ath0 i/f is immediately assigned and inet6 > address. In Mand 2006 it is never assigned and inet6 address.
To use Alfred Hitchcock parlance, this is a "McGuffin".
The inet6 address is a "link-local" address. All ethernet interfaces have one in IPv6. (Perhaps all interfaces acquire one but I don't remember my IPv6 well enough).
In particular, this address was assigned by the Linux kernel and does not involve the DHCP server in any way.
Regards,
Kapil. --
OS [osavill at uklinux.net]
Sat, 10 Feb 2007 10:08:52 +0000
Well, I've tried encoding a manual IP adress, netmask, gateway and DNS server 1.
The WiFi AP is 192.168.0.1, my assigned IP address is 192.168.0.2. The netmask is 255.255.0.0, the gateway is 192.168.0.1 and the first DNS server is 192.168.0.1
The NetApplet applet now shows a connected interface and shows a good signal strength. So I tried the following:
ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. From 192.168.0.2 icmp_seq=1 Destination Host Unreachable From 192.168.0.2 icmp_seq=2 Destination Host Unreachable From 192.168.0.2 icmp_seq=3 Destination Host Unreachable From 192.168.0.2 icmp_seq=4 Destination Host Unreachable From 192.168.0.2 icmp_seq=5 Destination Host Unreachable From 192.168.0.2 icmp_seq=6 Destination Host Unreachable traceroute 192.168.0.1 traceroute to 192.168.0.1 (192.168.0.1), 30 hops max, 38 byte packets 1 192.168.0.2 (192.168.0.2) 3001.401 ms !H 3004.433 ms !H 3003.195 ms !H ping www.yahoo.com ping: unknown host www.yahoo.com route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 10 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 10 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 35 0 0 ath0 192.168.0.0 0.0.0.0 255.255.0.0 U 35 0 0 ath0 0.0.0.0 192.168.0.1 0.0.0.0 UG 10 0 0 eth0 0.0.0.0 192.168.0.1 0.0.0.0 UG 35 0 0 ath0 iptables -L -n Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 eth0_in all -- 0.0.0.0/0 0.0.0.0/0 ath0_in all -- 0.0.0.0/0 0.0.0.0/0 Reject all -- 0.0.0.0/0 0.0.0.0/0 LOG all -- 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 6 prefix `Shorewall:INPUT:REJECT:' reject all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) target prot opt source destination eth0_fwd all -- 0.0.0.0/0 0.0.0.0/0 ath0_fwd all -- 0.0.0.0/0 0.0.0.0/0 Reject all -- 0.0.0.0/0 0.0.0.0/0 LOG all -- 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 6 prefix `Shorewall:FORWARD:REJECT:' reject all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy DROP) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 fw2net all -- 0.0.0.0/0 0.0.0.0/0 policy match dir out pol none fw2loc all -- 0.0.0.0/0 0.0.0.0/0 policy match dir out pol none Reject all -- 0.0.0.0/0 0.0.0.0/0 LOG all -- 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 6 prefix `Shorewall:OUTPUT:REJECT:' reject all -- 0.0.0.0/0 0.0.0.0/0 Chain Drop (1 references) target prot opt source destination reject tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:113 dropBcast all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 code 4 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 dropInvalid all -- 0.0.0.0/0 0.0.0.0/0 DROP udp -- 0.0.0.0/0 0.0.0.0/0 multiport dports 135,445 DROP udp -- 0.0.0.0/0 0.0.0.0/0 udp dpts:137:139 DROP udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:137 dpts:1024:65535 DROP tcp -- 0.0.0.0/0 0.0.0.0/0 multiport dports 135,139,445 DROP udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:1900 dropNotSyn tcp -- 0.0.0.0/0 0.0.0.0/0 DROP udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:53 Chain Reject (4 references) target prot opt source destination reject tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:113 dropBcast all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 code 4 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 dropInvalid all -- 0.0.0.0/0 0.0.0.0/0 reject udp -- 0.0.0.0/0 0.0.0.0/0 multiport dports 135,445 reject udp -- 0.0.0.0/0 0.0.0.0/0 udp dpts:137:139 reject udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:137 dpts:1024:65535 reject tcp -- 0.0.0.0/0 0.0.0.0/0 multiport dports 135,139,445 DROP udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:1900 dropNotSyn tcp -- 0.0.0.0/0 0.0.0.0/0 DROP udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:53 Chain all2all (0 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED Reject all -- 0.0.0.0/0 0.0.0.0/0 LOG all -- 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 6 prefix `Shorewall:all2all:REJECT:' reject all -- 0.0.0.0/0 0.0.0.0/0 Chain ath0_fwd (1 references) target prot opt source destination dynamic all -- 0.0.0.0/0 0.0.0.0/0 state INVALID,NEW loc2net all -- 0.0.0.0/0 0.0.0.0/0 policy match dir out pol none Chain ath0_in (1 references) target prot opt source destination dynamic all -- 0.0.0.0/0 0.0.0.0/0 state INVALID,NEW loc2fw all -- 0.0.0.0/0 0.0.0.0/0 policy match dir in pol none Chain dropBcast (2 references) target prot opt source destination DROP all -- 0.0.0.0/0 0.0.0.0/0 PKTTYPE = broadcast DROP all -- 0.0.0.0/0 0.0.0.0/0 PKTTYPE = multicast Chain dropInvalid (2 references) target prot opt source destination DROP all -- 0.0.0.0/0 0.0.0.0/0 state INVALID Chain dropNotSyn (2 references) target prot opt source destination DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:!0x17/0x02 Chain dynamic (4 references) target prot opt source destination Chain eth0_fwd (1 references) target prot opt source destination dynamic all -- 0.0.0.0/0 0.0.0.0/0 state INVALID,NEW net2all all -- 0.0.0.0/0 0.0.0.0/0 policy match dir out pol none Chain eth0_in (1 references) target prot opt source destination dynamic all -- 0.0.0.0/0 0.0.0.0/0 state INVALID,NEW net2all all -- 0.0.0.0/0 0.0.0.0/0 policy match dir in pol none Chain fw2loc (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain fw2net (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain loc2fw (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain loc2net (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain logdrop (0 references) target prot opt source destination LOG all -- 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 6 prefix `Shorewall:logdrop:DROP:' DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain logreject (0 references) target prot opt source destination LOG all -- 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 6 prefix `Shorewall:logreject:REJECT:' reject all -- 0.0.0.0/0 0.0.0.0/0 Chain net2all (2 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED Drop all -- 0.0.0.0/0 0.0.0.0/0 LOG all -- 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 6 prefix `Shorewall:net2all:DROP:' DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain reject (11 references) target prot opt source destination DROP all -- 255.255.255.255 0.0.0.0/0 DROP all -- 224.0.0.0/4 0.0.0.0/0 DROP all -- 0.0.0.0/0 0.0.0.0/0 PKTTYPE = broadcast DROP all -- 0.0.0.0/0 0.0.0.0/0 PKTTYPE = multicast DROP all -- 255.255.255.255 0.0.0.0/0 DROP all -- 224.0.0.0/4 0.0.0.0/0 REJECT tcp -- 0.0.0.0/0 0.0.0.0/0 reject-with tcp-reset REJECT udp -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable REJECT icmp -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-unreachable REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain shorewall (0 references) target prot opt source destination Chain smurfs (0 references) target prot opt source destination LOG all -- 255.255.255.255 0.0.0.0/0 LOG flags 0 level 6 prefix `Shorewall:smurfs:DROP:' DROP all -- 255.255.255.255 0.0.0.0/0 LOG all -- 224.0.0.0/4 0.0.0.0/0 LOG flags 0 level 6 prefix `Shorewall:smurfs:DROP:' DROP all -- 224.0.0.0/4 0.0.0.0/0I always tell people how good Linux is at networking !!
Owen
Kapil Hari Paranjape [kapil at imsc.res.in]
Fri, 9 Feb 2007 14:55:48 -0800
Hello,
On Sat, 10 Feb 2007, OS wrote:
> Well, I've tried encoding a manual IP adress, netmask, gateway and DNS server > 1. > > The WiFi AP is 192.168.0.1, my assigned IP address is 192.168.0.2. The netmask > is 255.255.0.0, the gateway is 192.168.0.1 and the first DNS server is > 192.168.0.1 > > The NetApplet applet now shows a connected interface and shows a good signal > strength.
So far so good.
> route -n > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref Use Iface > 192.168.0.0 0.0.0.0 255.255.255.0 U 10 0 0 eth0 > 169.254.0.0 0.0.0.0 255.255.0.0 U 10 0 0 eth0 > 169.254.0.0 0.0.0.0 255.255.0.0 U 35 0 0 ath0 > 192.168.0.0 0.0.0.0 255.255.0.0 U 35 0 0 ath0 > 0.0.0.0 192.168.0.1 0.0.0.0 UG 10 0 0 eth0 > 0.0.0.0 192.168.0.1 0.0.0.0 UG 35 0 0 ath0
Herein there is a problem. You seem to have two interfaces connected to the same network 192.168.x.x --- these are eth0 and ath0.
Since the eth0 entry is higher in the table it will take prcedence. Try to DOWN the eth0 interface and see what happens.
ifdown eth0should do it.
Regards,
Kapil. --
Benjamin A. Okopnik [ben at linuxgazette.net]
Sat, 10 Feb 2007 11:07:03 -0800
On Sat, Feb 10, 2007 at 10:08:52AM +0000, OS wrote:
> Well, I've tried encoding a manual IP adress, netmask, gateway and DNS server > 1. > > The WiFi AP is 192.168.0.1, my assigned IP address is 192.168.0.2. The netmask > is 255.255.0.0, the gateway is 192.168.0.1 and the first DNS server is > 192.168.0.1
I assume that the AP, the gateway, and the DNS server are all actually one machine/one interface. If you're saying anything else, then you have a problem right there - multiple hosts with the same IP on the same segment are a big no-no. Second, (not that this is a problem, but you might as well start out doing everything as "right" as you can) unless you have hosts which use the third quad of the IP (i.e., 192.168.2.X), your netmask should be 255.255.255.0.
> The NetApplet applet now shows a connected interface and shows a good signal > strength. So I tried the following: > > ping 192.168.0.1 > PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. > >From 192.168.0.2 icmp_seq=1 Destination Host Unreachable
OK, this would be the time to start doing the reduction process. You know that your packets aren't making the round trip from your host to the other one; why not? For the duration of the test, shut off/remove every non-critical piece that could get in the way of that (i.e., turn off any firewalls, remove any hubs/routers between the two hosts, etc.) and double-check any of the pieces that go in between (can you hook a cable between the two hosts and ping that way? If that works but the WiFi connection doesn't, what does 'iwconfig' report for that interface?)
All the other output that you've sent us demonstrates nothing more than the above test. It all says "no connection". Turn all that stuff off, test each piece in between, then start adding things back in one at a time. When the connection fails, you'll know what the problem is.
> I always tell people how good Linux is at networking !!
Linux does indeed provide you with complete access and lots of tools.
The biggest problem in cases like that is almost always operator error.
-- * Ben Okopnik * Editor-in-Chief, Linux Gazette * https://LinuxGazette.NET *
OS [osavill at uklinux.net]
Mon, 12 Feb 2007 09:15:42 +0000
I have wondered about eth0, however I kept returning to the fact that WiFi works on a different partition running Mand 2006 on the same machine. The proof - I'm using Wireless now on Mand 2006.
On Mand 2006 route -n produces
Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 ath0 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 ath0Wow ! very different !
On Mand 2007 after a fresh reboot route -n produces
Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 35 0 0 ath0 169.254.0.0 0.0.0.0 255.255.0.0 U 35 0 0 ath0 0.0.0.0 192.168.0.1 0.0.0.0 UG 35 0 0 ath0There's no eth0 but where on earth did 169.254.0.0 come from. I've tried reconfiguring the interface but I cannot get rid of 169.254.0.0 nor can I find it in any configuration.
Thanks, Owen
OS [osavill at uklinux.net]
Mon, 12 Feb 2007 09:19:08 +0000
Sorry, forgot to mention. The previous mail was when I hardwired this machine's IP address to 192.168.0.5. When I switch back to DHCP route - n produces nothing at all.
Thanks, Owen
OS [osavill at uklinux.net]
Mon, 12 Feb 2007 09:31:00 +0000
> I assume that the AP, the gateway, and the DNS server are all actually > one machine/one interface. If you're saying anything else, then you haveThey are indeed. I was just trying to manually configure anything I could think of !!
> every non-critical piece that could get in the way of that (i.e., turn > off any firewalls, remove any hubs/routers between the two hosts, etc.) > and double-check any of the pieces that go in between (can you hook a > cable between the two hosts and ping that way? If that works but the > WiFi connection doesn't, what does 'iwconfig' report for that > interface?)I've shut off the firewalls and I have no intermediate hardware between the laptop and the AP. I have also attached a cable direct to the AP and everything works just fine. I'll have to get back to you on iwconfig as I'll need to reboot into Mand 2007. I think I've posted it before.
> The biggest problem in cases like that is almost always operator error.I hope you are right. I have begun to see others reporting the same type of issue. I am using WiFi to send this now from a different partition running Mand 2006 on the same machine.
I did an upgrade from 2006 to 2007 and a perfectly good WiFi connection was broken in exactly the same way. About the only thing I can think of is to install Mand 2006 and upgrade every package on at a time until WiFi breaks. Then try to regress the same package on Mand 2007 and see if WiFi now works.
Thanks Owen
OS [osavill at uklinux.net]
Mon, 12 Feb 2007 09:53:06 +0000
Found two entries for 169.254
httpd/lib/perl5/vendor_perl/5.8.8/Net/IP.pm as follows:
# Definition of the Ranges for IPv4 IPs
%IPv4ranges = (
'00000000' => 'PRIVATE', # 0/8
'00001010' => 'PRIVATE', # 10/8
'01111111' => 'PRIVATE', # 127.0/8
'101011000001' => 'PRIVATE', # 172.16/12
'1100000010101000' => 'PRIVATE', # 192.168/16
'1010100111111110' => 'RESERVED', # 169.254/16
'110000000000000000000010' => 'RESERVED', # 192.0.2/24
'1110' => 'RESERVED', # 224/4
'11110' => 'RESERVED', # 240/5
'11111' => 'RESERVED', # 248/5
);
and
httpd/lib/libDrakX/network/connection/ethernet.pm as follows:
if_($self->{protocol} eq 'dhcp',
{ label => N("DHCP client"), val => \$self->{address}
{dhcp_client}, list => \@dhcp_clients, advanced => 1 },
{ label => N("DHCP timeout (in seconds)"), val =>
\$self->{address}{dhcp_timeout}, advanced => 1 },
{ text => N("Get YP servers from DHCP"), val => \$self->{address}
{peeryp}, type => "bool", advanced => 1 },
{ text => N("Get NTPD servers from DHCP"), val =>
\$self->{address}{peerntpd}, type => "bool", advanced => 1 },
{ label => N("DHCP host name"), val => \$self->{address}
{dhcp_hostname}, advanced => 1 },
#- FIXME: install zcip if not checked
if_(0, { text => N("Do not fallback to Zeroconf (169.254.0.0
network)"), type => "bool", val => \$self->{address}{skip_zeroconf}, advanced
=> 1 }),
),
];
}
I don't suppose FIXME is some indication ?!?!?! What is zeroconf ?
Many thanks, Owen
John Karns [johnkarns at gmail.com]
Sun, 11 Feb 2007 19:46:52 -0500
On 2/12/07, OS <osavill at uklinux.net> wrote:
> Found two entries for 169.254 > httpd/lib/perl5/vendor_perl/5.8.8/Net/IP.pm as follows: > # Definition of the Ranges for IPv4 IPs
[snip]
> '1010100111111110' => 'RESERVED', # 169.254/16
[snip]
> I don't suppose FIXME is some indication ?!?!?! What is zeroconf ?
Zeroconf is a carry-over from MS wind0ws, which assigns an address to an ethernet interface (sometimes denoted by IF) in the event that nothing else has. Normally during (usually boot time) initialization of an IF, a protocol called DHCP is utilized to send a signal over a network to see if it gets a response from a device which may be listening for that signal. That signal notifies the listeneing device that there is an ethernet interface which is requesting an IP address. This mechanism provides a way of centrally managing IPaddresses which are going to be used on the network.
Zeroconf should only become activated if no device has responded to the broadcast signal sent out in search of an IP address. Zeroconf would assign an address in a range using the block corresponding to the 169.254.x.x address. The idea behind doing that is to try to garantee a connection between interconnected devices having ethernet interfaces in an environment where there is no device present listening for DHCP requests for IP addresses. Thus you can interconnect two machines which may be running wind0ws (or Linux) and have the capability of transferring data between them.
It seems as though there is an error in the zeroconf system init script where it fails to detect that the device already has had an IP address assigned - assuming that the zeroconf script is indeed being called after the script which initiates the DHCP request.
I would suggest that you try to disable the zeroconf script, at least temporarily. How you would do that with Mandriva I can't say, as I don't use that distro. I woulod guess that they have a menu entry which will lead you to the utility they most likely provide to do it.
As to whether that is the fundamental cause of your problem, I tend to doubt it, but I would disable it anyway.
-- John