Apache2, WebDAV, SSL and MySQL: Life In The Fast Lane

Introduction

As part of my work I had to set up an upload/download site for our customers with the following brief:

Part of the Web site would have to be accessible by anybody
Another part of the Web site would need authentication in order to download software, patches, etc...
Some of the customers should be allowed to upload files on the Web site - but within a set quota.
Uploading, downloading and managing the Web site content would have to be easy -
and it was decided that it would have to be done via HTTP for several reasons:
1) in some organizations FTP isn't always allowed and active FTP can sometime cause a problem with firewalls.
2) using SFTP or SSH to manage the site would require specialized client software.

We chose to use WebDAV with a patched version of the Apache 2 WebDAV module, since we needed quota functionality.

Additionally, all the WebDAV traffic and authentication was to be done via HTTPS. This was required because Windows XP clients simply refuse authentication of a WebDAV directory, and in any case has the benefit of making the management of the site far more secure regardless of the WebDAV client and platform used.

One thing to bear in mind is that I had to use Apache 2 instead of Apache 1.3.x as there is no WebDAV patch for Apache 1.3.x.

The following article will explain how to set up and configure Apache 2, HTTPS, WebDAV. In addition, it will demonstrate how to recompile the WebDAV module to support quota and how to use MySQL to provide authentication and give arbitrary access control to the various part of the site.

Configuration overview

The configuration will be done in the following order:

installing apache 2 and the WebDAV module
creating an SSL certificate (including setting up the CA) for the Web server
configuring apache to serve HTTPS pages
enabling WebDAV and configuring simple authentication
recompiling the apache WebDAV module to provide quota
configuring apache to use MySQL for more complex authentication
configuring the site to provide all the functionalities mentioned in the introduction.
Footnote, comments/suggestions

Installing Apache 2 and the WebDAV module


  
    
      #
apt-get
install apache2 libapache-mod-dav

Reading Package Lists... Done

Building Dependency Tree... Done

The following extra packages will be installed:

  apache-common apache2-common apache2-mpm-worker
apache2-utils
libapr0 libxmltok1 openssl ssl-cert

Suggested packages:

  apache apache-ssl apache-perl apache2-doc lynx www-browser
ca-certificates

The following NEW packages will be installed:

  apache-common apache2 apache2-common apache2-mpm-worker
apache2-utils libapache-mod-dav libapr0 libxmltok1 openssl

  ssl-cert

0 upgraded, 10 newly installed, 0 to remove and 0 not upgraded.

Need to get 3141kB of archives.

After unpacking 10.1MB of additional disk space will be used.

Do you want to continue? [Y/n] y

Creating a certificate/CA setup for the Web server

To serve Web pages with the HTTPS protocol, the Web server will require a certificate. If you are already familiar with certificate management on Linux then skip ahead to configure apache to serve HTTPS pages, otherwise the following steps will explain how to set up you own certificate authority and then create a certificate for your Web server.

Creating a certificate authority

Note: most of the following was copied and slightly modified from Nate Carlson's excellent IPSec Web page (https://www.natecarlson.com/linux/ipsec-x509.php).

Edit the file "/usr/lib/ssl/misc/CA.sh", and change the line that says 'DAYS="days 365"' to a very high number (this sets how long the certificate authority's certificate is valid.). This is necessary as the certificate authority must last longer than the Web server certificate. I generally set it to 3560 (which roughly amount to 10 years). Run the command 'CA.sh -newca'. Follow the prompts, as below. Example input is in red, and my comments are in blue. Be sure to not use any non-alphanumeric characters, such as dashes, commas, plus signs, etc. These characters may make things more difficult for you.


  
    
      # /usr/lib/ssl/misc/CA.sh
-newca

CA certificate filename (or enter to create)

      (enter)

Making CA certificate ...

Using configuration from /usr/lib/ssl/openssl.cnf

Generating a 1024 bit RSA private key

.............................................................................+++

........................................+++

writing new private key to './demoCA/private/./cakey.pem'

Enter PEM pass phrase:(enter password) This is
the password you will
need to create any other certificates.

Verifying password - Enter PEM pass phrase:(repeat
password)

-----

You are about to be asked to enter information that will be incorporated

into your certificate request.

What you are about to enter is what is called a Distinguished Name or a
DN.

There are quite a few fields but you can leave some blank

For some fields there will be a default value,

If you enter '.', the field will be left blank.

-----

Country Name (2 letter code) [AU]:US(enter) Enter
your country code here

State or Province Name (full name) [Some-State]:State(enter) Enter
your state/province/county here

Locality Name (eg, city) []:City(enter) Enter
your city here

Organization Name (eg, company) [Internet Widgits Pty Ltd]:ExampleCo(enter)
      Enter your company name here (or leave
blank)

Organizational Unit Name (eg, section) []:IT(enter)
      OU or department, if you like. You
can leave it blank if you want.

Common Name (eg, YOUR name) []:CA(enter) The name
of your Certificate
Authority

Email Address []:ca@example.com(enter) E-Mail
Address

Create the certificate for your Web server


  
    
      # /usr/lib/ssl/misc/CA.sh
-newreq

Using configuration from /usr/lib/ssl/openssl.cnf

Generating a 1024 bit RSA private key

...................................+++

...............................+++

writing new private key to 'newreq.pem'

Enter PEM pass phrase:(enter password) Password
to encrypt the new cert's
private key with - you'll need this!

Verifying password - Enter PEM pass phrase:(repeat
password)

-----

You are about to be asked to enter information that will be incorporated

into your certificate request.

What you are about to enter is what is called a Distinguished Name or a
DN.

There are quite a few fields but you can leave some blank

For some fields there will be a default value,

If you enter '.', the field will be left blank.

-----

Country Name (2 letter code) [AU]:US(enter)

State or Province Name (full name) [Some-State]:State(enter)

Locality Name (eg, city) []:City(enter)

Organization Name (eg, company) [Internet Widgits Pty Ltd]:ExampleCo(enter)

Organizational Unit Name (eg, section) []:(enter)

Common Name (eg, YOUR name) []:host.example.com(enter)The host
name of  your Web server

Email Address []:user@example.com(enter) (optional)

      

Please enter the following 'extra' attributes

to be sent with your certificate request

A challenge password []:(enter)

An optional company name []:(enter)

Request (and private key) is in newreq.pem

What we just did is generate a Certificate Request - this is the same type of request that you would send to Thawte or Verisign to get a generally-accepted SSL certificate. For our uses, however, we'll sign it with our own CA:


  
    
      # /usr/lib/ssl/misc/CA.sh
-sign

Using configuration from /usr/lib/ssl/openssl.cnf

Enter PEM pass phrase:(password you
entered when creating the ca)

Check that the request matches the signature

Signature ok

The Subjects Distinguished Name is as follows

countryName :PRINTABLE:'US'

stateOrProvinceName :PRINTABLE:'State'

localityName :PRINTABLE:'City'

organizationName :PRINTABLE:'ExampleCo'

commonName :PRINTABLE:'host.example.com'

emailAddress :IA5STRING:'user@example.com'

Certificate is to be certified until Feb 13 16:28:40 2012 GMT (3650
days)

Sign the certificate? [y/n]:y(enter)

      

1 out of 1 certificate requests certified, commit? [y/n]y(enter)

Write out database with 1 new entries

Data Base Updated

      (certificate snipped)

Signed certificate is in newcert.pem

Next, move the output files to names that make a bit more sense for future reference, where "host.example.com..." in the example below is the name of your Web server.


  
    
      # mv newcert.pem host.example.com.pem

# mv newkey.pem host.example.com.key

Configuring apache to serve HTTPS pages

Copy the above 2 certificates files into /etc/apache2/ssl and make sure you change the files to be only readable by root.


  
    
      # chmod 400
/etc/apache2/ssl/host*

For convenience, you may want to remove the passphrase from the RSA private key which will stop to prompt for the passphrase when starting or restarting apache. However if you prefer to keep the passphrase, skip to the next step.

First make a backup of the encrypted key:


  
    
      # cp
/etc/apache2/ssl/host.example.com.key
/etc/apache2/ssl/host.example.com-bkp

Then re-write the key with encryption. You will be prompted for the original encrypted key passphrase.


  
    
      # openssl
rsa -in /etc/apache2/host.example.com.key-bkp -out
/etc/apache2/ssl/host.example.com.key

Enter pass phrase for /etc/apache2/ssl/host.example.com.key-bkp:

writing RSA key

Edit the file "/etc/apache2/mods-available/ssl.conf" and add the following at the bottom.


  
    
      SSLCertificateFile   
/etc/apache2/ssl/host.example.com.pem

SSLCertificateKeyFile /etc/apache2/ssl/host.example.com.key

      

listen 443

Enable HTTPS by creating symbolic links to the "SSL" files:


  
    
      # ln -s
/etc/apache2/mods-available/ssl.conf /etc/apache2/mods-enabled/ssl.conf

# ln -s /etc/apache2/mods-available/ssl.load
/etc/apache2/mods-enabled/ssl.load

Create a site configuration file:


  
    
      # touch
/etc/apache2/sites-available/testwebdav

Copy the following stanza into it:


  
    
      <VirtualHost
      WEB_server_IP_address:443>

      

    Servername testwebdav.lansa.co.uk

    Documentroot /var/www/webdav

    CustomLog /var/log/apache2/access.log combined

      

    <IfModule mod_ssl.c>

        SSLEngine on

        SetEnvIf User-Agent
".*MSIE.*" nokeepalive ssl-unclean-shutdown

    </IfModule>

      

</VirtualHost>

replacing WEB_server_IP_address with the IP address of your own server.

Last of all, "enable" the site by creating a symbolic link to the configuration file:


  
    
      # ln -s
/etc/apache2/sites-available/testwebdav
/etc/apache2/sites-enabled/testwebdav

WebDAV directory

Now we need to create the Webdav directory and create a test file in it so we can test HTTPS and WebDAV functionality.


  
    
      # mkdir
/var/www/webdav

Change its ownership to the account and group under which apache is running (under Debian the apache user and group are both www-data).


  
    
      # chown
www-data:www-data /var/www/webdav/

Then create a test file in the WebDAV directory.


  
    
      # echo
"hello world" > /var/www/webdav/test.txt

       # chown apache:apache
/var/www/webdav/test.txt

       # chmod 640
/var/www/webdav/test.txt

Now reload apache to make the changes effective.


  
    
      #
/etc/init.d/apache2 reload

You may want to check that apache is running HTTP and HTTPS by using the "netstat -anpt" command:


  
    
      
      # netstat -anpt
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN     1870/portmap
tcp        0      0 127.0.0.1:692           0.0.0.0:*               LISTEN     2636/famd
tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN     2455/exim4
tcp6       0      0 :::80                   :::*                    LISTEN     5395/apache2
tcp6       0      0 :::22                   :::*                    LISTEN     2470/sshd
tcp6       0      0 :::443                  :::*                    LISTEN     5395/apache2

If everything is OK, you should see that apache2 is listening on port 80 and more importantly on port 443, as in the above example. If not, consult your the apache log file (/var/log/apache2/) for problem reports.

Now open the following URL in your Web browser:


  
    
      https://WEB_server_IP_address/test.txt

replacing "WEB_server_IP_address" with either the IP address of your server or its FQDN. This should ask you to accept a certificate, and once you have accepted, it should display:


  
    
      hello world

Enabling WebDAV and configuring simple authentication

Enable WebDAV and apache simple authentication by once again creating a symbolic link to the modules in /etc/apache2/mods-available to /etc/apache2/mods-enabled:


  
    
      # ln -s
/etc/apache2/mods-available/auth_anon.load
/etc/apache2/mods-enabled/auth_anon.load

# ln -s /etc/apache2/mods-available/dav_fs.conf
/etc/apache2/mods-enabled/dav_fs.conf

# ln -s /etc/apache2/mods-available/dav_fs.load
/etc/apache2/mods-enabled/dav_fs.load

# ln -s /etc/apache2/mods-available/dav.load
/etc/apache2/mods-enabled/dav.load

Create a simple authentication file and set its permission so only the apache account can read it.


  
    
      # htpasswd -c
/etc/apache2/passwd.dav test

# chown root:www-data /etc/apache2/passwd.dav

# chmod 640 /etc/apache2/passwd.dav

Now you need to modify the site configuration file to enable WebDAV and authentication..
Do it according the example below (added directives in red).


  
    
      <VirtualHost WEB_server_IP_address:443>

      

    Servername testwebdav.lansa.co.uk

    Documentroot /var/www/webdav

    CustomLog /var/log/apache2/access.log combined

      

    <IfModule mod_ssl.c>

        SSLEngine on

        SetEnvIf User-Agent
".*MSIE.*" nokeepalive ssl-unclean-shutdown

    </IfModule>

      

         
<Directory /var/www/webdav>

                 
DAV On

                 
AuthType Basic

                 
AuthName "test"

                 
AuthUserFile /etc/apache2/passwd.dav

                 
<Limit PUT POST DELETE PROPFIND PROPPATCH MKCOL COPY MOVE LOCK
UNLOCK>

                     
Require user test

                 
</Limit>

         
</Directory>

      

</VirtualHost>

Again we need to reload apache to make the changes effective:


  
    
      #
/etc/init.d/apache2 reload

Now to test WebDAV you need a "WebDAV client".

Internet Explorer on Windows 2000 and Windows XP.
Windows 2000 and XP built in WebDAV support has the advantage of having nothing to be installed, however it has the disadvantage of not being able to create files but just copy or rename them (but all directory operation are supported).
Novel Netdrive https://www.loyola.edu/5555/netdrive/installingnetdrive/
Novel Netdrive is a "freeware" and unlike Windows' built-in WebDAV support, Netdrive support all files and directories operations. However its disadvantage is that you have to install it.
Other WebDAV clients https://www.webdav.org/projects/

I will be using Windows built-in WebDAV support through Internet Explorer as it is adequate for the remaining of this article.

In Internet Explorer select "File" => "Open" and open this URL:


  
    
      https://WEB_server_IP_address/

Make sure to tick the check box next to "Open as Web Folder" (this is very important; otherwise, it won't open the folder using the WebDAV protocol and all you'll be able to do is view the files but not modify them).

Once again you will be prompted to accept a certificate but now additionally you will also be prompted to provide a user name and password.

Note: If you are constantly prompted for the user name and password, either they are incorrect or there is a problem with authentication. It could be that apache cannot read the password file because there is a syntax error or that apache doesn't have the permission to read the file. Look in "/var/log/apache/error.log" to find out more.

To test WebDAV functionalities, in Internet Explorer, right click on "test.txt" (the test file we created earlier), select "Rename", rename the file and press the "Enter" key.

Enabling public browsing access to the site

You may want to have your site "browsable" or a least 1 part of the site (see later on for more granular access). To do so modify the site configuration file to enable WebDAV and authentication. Do it according the example below (added directive in red):


  
    
      <VirtualHost WEB_server_IP_addres:80>

      

          
Servername testwebdav.lansa.co.uk

         
Documentroot /var/www/webdav

      

</VirtualHost>

      

<VirtualHost WEB_server_IP_addres:443>

      

    Servername testwebdav.lansa.co.uk

    Documentroot /var/www/webdav

    CustomLog /var/log/apache2/access.log combined

      

    <IfModule mod_ssl.c>

        SSLEngine on

        SetEnvIf User-Agent
".*MSIE.*" nokeepalive ssl-unclean-shutdown

    </IfModule>

      

    <Directory /var/www/webdav>

            DAV
On

           
AuthType Basic

           
AuthName "test"

           
AuthUserFile /etc/apache2/passwd.dav

           
<Limit PUT POST DELETE PROPFIND PROPPATCH
MKCOL COPY MOVE LOCK UNLOCK>

               
Require user test

           
</Limit>

    </Directory>

      

</VirtualHost>

Once again reload apache to make the changes effective:


  
    
      #
/etc/init.d/apache2 reload

Open the following URL in your Web browser (but not as a Web Folder).


  
    
      https://WEB_server_IP_address/test.txt

replacing "WEB_server_IP_address" with the IP address of your server or it FQDN.

This should display:


  
    
      hello world

Recompiling the apache WebDAV module to provide quota

As a quick overview, in order to provide quota capabilities with WebDAV, you will need the apache2 source. You will also need to patch the WebDAV modules and recompile them.

Recompiling the apache WebDAV modules

On Debian Sarge, the apache version I used was 2.0.54.

Obtain the Apache 2.0.54 source from https://archive.apache.org/dist/httpd/httpd-2.0.54.tar.gz
Obtain the Apache WebDAV modules patch from https://www.geocities.jp/t_sat7/webdav/webdav.html
(I used https://leche.goodcrew.ne.jp/webdav/webdav-2.0.54-quota-2.3any.txt or webdav-2.0.54-quota-2.3any.txt)

Note: if you are using a later version of apache 2 than 2.0.54 obtain the source from https://httpd.apache.org/ and the corresponding WebDAV patch from https://www.geocities.jp/t_sat7/webdav/webdav.html.


  
    
      # tar -xvzf
httpd-2.0.54.tgz

      (snip) 

# cd httpd-2.0.54

# patch -p2 <
/location/where/the/patch/is/webdav-2.0.54-quota-2.3any.txt

patching file modules/dav/main/mod_dav.c

patching file modules/dav/main/quotachk.h

patching file modules/dav/main/quotachk.c

patching file modules/dav/main/config5.m4

patching file configure

# ./configure --enable-modules=most --enable-mods-shared=all

      (snip) 

      # make

Once the compilation has completed, verify that you have the 2 WebDAV modules binaries (they should be located in /httpd-2.0.54/modules/dav/).


  
    
      # ls -l
./modules/dav/fs/.libs/mod_dav_fs.so

-rwxr-xr-x  1 root root 217493 2006-03-24 10:10
./modules/dav/fs/.libs/mod_dav_fs.so

# ls -l ./modules/dav/main/.libs/mod_dav.so

-rwxr-xr-x  1 root root 417579 2006-03-24 10:09
./modules/dav/main/.libs/mod_dav.so

Make a backup of the of your current apache modules:


  
    
      #
mv /usr/lib/apache2/modules/mod_dav.so /usr/lib/apache2/modules/mod_dav.so-bkp

#
mv /usr/lib/apache2/modules/mod_dav_fs.so /usr/lib/apache2/modules/mod_dav_fs.so-bkp

and copy the new modules to the apache module directory:


  
    
      # cp
./modules/dav/main/.libs/mod_dav.so /usr/lib/apache2/modules/mod_dav.so

# cp ./modules/dav/fs/mod_dav_fs.so
/usr/lib/apache2/modules/mod_dav_fs.so

Enabling quota for the site

To enable quota for the site, use the "DAVSATMaxAreaSize" directive with size limit specified in kB. Again, the example below shows the added directive in red.


  
    
      <VirtualHost WEB_server_IP_address:80>

      

    Servername testwebdav.lansa.co.uk

    Documentroot /var/www/webdav

      

</VirtualHost>

      

<VirtualHost WEB_server_IP_address:443>

      

    Servername testwebdav.lansa.co.uk

    Documentroot /var/www/webdav

    CustomLog /var/log/apache2/access.log combined

      

    <IfModule mod_ssl.c>

        SSLEngine on

        SetEnvIf User-Agent
".*MSIE.*" nokeepalive ssl-unclean-shutdown

    </IfModule>

      

    <Directory /var/www/webdav>

            DAV
On

                 
# DAVSATMaxAreaSize: the size is specificed in kBytes

                 
# since each blocks are 4K each

                 
# add about 50K above the limit wanted

                 
DAVSATMaxAreaSize 150

           
AuthType Basic

           
AuthName "test"

           
AuthUserFile /etc/apache2/passwd.dav

           
<Limit PUT POST DELETE PROPFIND PROPPATCH MKCOL COPY MOVE LOCK
UNLOCK>

               
Require user test

           
</Limit>

    </Directory>

      

</VirtualHost>

A few words about the quota limit before moving on


  
    
      
One important thing you should be aware of is the quota limit is
dependent on the block size of your
Web server file
system and may cause the quota limit to be reached quicker than you
would expect.
Here is an example:


If you have set the quota limit to 50 kByte and your file system has a
block
size of 4 kByte and say all files in the
WebDAV directory amount to a total of 48 kByte, when you copy a 1kByte
text
file from a windows
system to
the WebDAV directory, this 1kByte text file will occupy a 4 kBytes block
on the WebDAV folder thus
exceeding
the
limit even though you thought you had 2 kBytes free.



An easy workaround is to set the limit a little bit higher than
required. For example a strict limit for a quota of 150 kByte
would be to set the quota to 152 kByte. However in practice I
personally add 50 kBytes over the required limit.

Now this time in order use the "quota enabled" WebDAV modules and quota directives for the site, you have to restart apache.


  
    
      #
/etc/init.d/apache2 restart

After that, restart your WebDAV session with Internet Explorer or your favorite WebDAV client and copy a file in order to exceed the 150 kBytes limit.

At the same time you may want to see what is happening on the server in real time:


  
    
      tail
-f /var/log/apache2/error.log

Once you reach or exceed the quota limit Internet Explorer will report the message: "An error occurred copying some or all of the selected files" (NetDrive will properly report that the file copy failed because the storage space has been exceeded) and an error like the following example will appear in /var/log/apache2/error.log:


  
    
      [Fri Mar 24
12:26:13 2006] [error] [client 10.44.10.1] File does not exist:
/var/www/webdav/impunx.log

[Fri Mar 24 12:26:13 2006] [error] WebDAV-Quota: Directory
`/var/www/webdav/' size `404KB' is over `150KB'!

Configuring Apache to use MySQL for more complex authentication

Installing MySQL


  
    
      # apt-get
install mysql-server libapache2-mod-auth-mysql

Reading Package Lists... Done

Building Dependency Tree... Done

The following extra packages will be installed:

  libdbd-mysql-perl libdbi-perl libmysqlclient12
libnet-daemon-perl libplrpc-perl mysql-client mysql-common

Suggested packages:

  dbishell mysql-doc

The following NEW packages will be installed:

  libapache2-mod-auth-mysql libdbd-mysql-perl libdbi-perl
libmysqlclient12 libnet-daemon-perl libplrpc-perl mysql-client

  mysql-common mysql-server

0 upgraded, 9 newly installed, 0 to remove and 0 not upgraded.

Need to get 5233kB of archives.

After unpacking 12.6MB of additional disk space will be used.

Do you want to continue? [Y/n] y

Creating a MySQL database

The following steps will outline how to create a MySQL database. This is the first of several databases that need to be created.

The default database name and table to use with apache are respectively: http_auth and mysql_auth, however you can use any database name you want providing that you specify it the site configuration file (more later). In my case the I called the 1st database "sysadmins".


  
    
      # mysqladmin
-uroot -p create sysadmins

Enter password::

Now create the table.


  
    
      # mysqladmin
-uroot -p create sysadmins

# mysql -uroot -p

      

mysql> use sysadmins

Database changed

mysql> create table mysql_auth

    -> (

    -> username char(50) not null,

    -> passwd char(25),

    -> groups char(25)

    -> );

Query OK, 0 rows affected (0.01 sec)

      

mysql> create unique index mysqlauthix1 on mysql_auth(username);

Query OK, 0 rows affected (0.01 sec)

Records: 0  Duplicates: 0  Warnings: 0

Now create a user which will be used by apache to read the database:


  
    
      mysql> grant
select on sysadmins.* to
apache@localhost identified by '1pach2';  (apache@localhost user is the
user and '1pach2' is the
password)

Query OK, 0 rows affected (0.00 sec)

Now add a user (to be used for WebDAV authentication later.)


  
    
      mysql>
insert into mysql_auth (username, passwd, groups) values
('admin','1dm3n','sysadmins');

Query OK, 1 row affected (0.01 sec)

Log out of mysql and check that everything is OK: try to log into mysql as the apache user that was just created and verify that you can read the "mysql_auth" table. It should allow you to log on (otherwise you have made an error with that user name or password), allow you to select the database (otherwise there is a grant problem with the database), and return the details of the user that was inserted.


  
    
      delldebian:/etc/apache2/mods-enabled#
mysql -uapache -p

Enter password:

Welcome to the MySQL monitor.  Commands end with ; or \g.

Your MySQL connection id is 36 to server version:
4.0.24_Debian-10sarge1-log

      

Type 'help;' or '\h' for help. Type '\c' to clear the buffer.

      

mysql> use sysadmins

Reading table information for completion of table and column names

You can turn off this feature to get a quicker startup with -A

      

Database changed

mysql> select * from mysql_auth;

+----------+--------+-----------+

| username | passwd | groups    |

+----------+--------+-----------+

| admin    | 1dm3n  | sysadmins |

+----------+--------+-----------+

1 row in set (0.00 sec)

Configuring apache to use MySQL authentication

Create the apache mysql configuration file:


  
    
      #
touch /etc/apache2/mods-available/auth_mysql.conf

Specify the host, user, and password of the apache user created earlier to read the databases.


  
    
      Auth_MySQL_Info
localhost apache 1pach2

Now enable the apache mysql authentication modules.


  
    
      # ln -s
/etc/apache2/mods-available/auth_mysql.load
/etc/apache2/mods-enabled/auth_mysql.load

# ln -s /etc/apache2/mods-available/auth_mysql.conf
/etc/apache2/mods-enabled/auth_mysql.conf

Reconfiguring the site to use MySQL authentication

Once again in the example below I have added in red the extra directives to use MySQL authentication and which database to use for that particular directory. Taking care of which database to use is done with the Auth _MySQL_DB parameter followed by the database name. Also, pay attention to the line in blue which I have commented out (in the production version, I actually deleted it). Failure to comment it out or delete it will result in apache still using the file "/etc/apache2/passwd.dav" for authentication instead the MySQL database and any attempts to authenticate with any user in the database will fail.


  
    
      <VirtualHost WEB_server_IP_address:80>

      

    Servername testwebdav.lansa.co.uk

    Documentroot /var/www/webdav

      

</VirtualHost>

      

<VirtualHost WEB_server_IP_address:443>

      

    Servername testwebdav.lansa.co.uk

    Documentroot /var/www/webdav

    CustomLog /var/log/apache2/access.log combined

      

    <IfModule mod_ssl.c>

        SSLEngine on

        SetEnvIf User-Agent
".*MSIE.*" nokeepalive ssl-unclean-shutdown

    </IfModule>

      

    <Directory /var/www/webdav>

            DAV
On

            #
DAVSATMaxAreaSize: the size is specificed in kBytes

            #
since each blocks are 4K each

            #
add about 50K above the limit wanted

           
DAVSATMaxAreaSize 150

           
AuthType Basic

           
AuthName "test"

            #AuthUserFile
/etc/apache2/passwd.dav

           
<Limit PUT POST DELETE PROPFIND PROPPATCH MKCOL COPY MOVE LOCK
UNLOCK>

                     
Auth_MySQL_DB sysadmins

                     
Auth_MySQL_Encrypted_Passwords off

                     
Require user admin

           
</Limit>

    </Directory>

      

</VirtualHost>

Now restart apache to load the MySQL authentication modules and take the MySQL directives into account.


  
    
      #
/etc/init.d/apache2 restart

After that, restart your WebDAV session and log in with the "admin" user account created above.

Configuring the site to provide all the functions mentioned in the introduction

So far, I have covered the basics. All the extra functions are nothing more than a variation of what has already been covered. The additional capabilities that I'm going to add to the site are:

allow and delegate management of some part the site to a group of operators
make some part of site only visible and accessible to some customers
allow some customers to upload files (within a set quota) to a restricted part of the site
use phpmyadmin to allow the people in the operators group to manage the list of allowed customers. Using phpmyadmin also makes some of database management tasks much easier and quicker.

Installing phpmyadmin


  
    
      # apt-get
install phpmyadmin libapache2-mod-php4

Reading Package Lists... Done

Building Dependency Tree... Done

The following extra packages will be installed:

  apache2-mpm-prefork libapache-mod-php4 php4 php4-mysql

Suggested packages:

  php4-pear php4-gd php5-gd

The following packages will be REMOVED:

  apache2-mpm-worker

The following NEW packages will be installed:

  apache2-mpm-prefork libapache-mod-php4 libapache2-mod-php4 php4
php4-mysql phpmyadmin

0 upgraded, 6 newly installed, 1 to remove and 0 not upgraded.

Need to get 1815kB/6220kB of archives.

After unpacking 17.3MB of additional disk space will be used.

Do you want to continue? [Y/n] y

Now that phpmyadmin has been installed, is a good idea to secure and restrict its access. The first thing I do is move the phpmyadmin symbolic link from the Web's root directory into the WebDAV directory so I can control how it accessed from the site configuration file.


  
    
      # mv
/var/www/phpmyadmin /var/www/webdav/phpmyadmin

Then I modify the site configuration file to restrict the access. Again, following is the updated site configuration files with the added directive in red which I'll explain after (thought the comments should make it mostly self explanatory).


  
    
      <VirtualHost WEB_server_IP_address:80>

      

    Servername testwebdav.lansa.co.uk

    Documentroot /var/www/webdav

      

           #
Hide restricted access to phpmyadmin

             
<Directory
/var/www/webdav>

                  
IndexIgnore phpmyadmin

             
</Directory>

      

           #
redirect
https://Site_Name/phpmyadmin to
https://Site_Name/phpmyadmin

             
redirect /phpmyadmin
https://Site_Name/phpmyadmin

      

</VirtualHost>

      

<VirtualHost WEB_server_IP_address:443>

    Servername testwebdav.lansa.co.uk

    Documentroot /var/www/webdav

    CustomLog /var/log/apache2/access.log combined

      

    <IfModule mod_ssl.c>

        SSLEngine on

        SetEnvIf User-Agent
".*MSIE.*" nokeepalive ssl-unclean-shutdown

    </IfModule>

      

         # restrict
access of phpmyadmin to the sysadmins group

         <Directory
/var/www/webdav/phpmyadmin>

            
Order Deny,Allow

               
Deny From all

               
allow from IP_address,
IP_address_range, etc...

             
AuthType Basic

             
AuthName "restricted access
to phpmyadmin"

               
Auth_MySQL_DB
sysadmins

               
Auth_MySQL_Encrypted_Passwords off

              
require group sysadmins

         
</Directory>

      

    <Directory /var/www/webdav>

            DAV
On

            #
DAVSATMaxAreaSize: the size is specificed in kBytes

            #
since each blocks are 4K each

            #
add about 50K above the limit wanted

           
DAVSATMaxAreaSize 150

           
AuthType Basic

           
AuthName "test"

           
<Limit PUT POST DELETE PROPFIND PROPPATCH MKCOL COPY MOVE LOCK
UNLOCK>

               
Auth_MySQL_DB sysadmins

               
Auth_MySQL_Encrypted_Passwords off

               
Require user admin

           
</Limit>

    </Directory>

      

</VirtualHost>

The following prevents indexing the phpmyadmin symbolic link, thus hiding it from the root the WebDAV site.
Mind you if people knew the URL they can still accesss it. However as you'll see later, further levels of restriction
to access the phpmyadmin URL lay ahead.


  
    
          
# Hide restricted access to phpmyadmin

           <Directory
/var/www/webdav>

                  
IndexIgnore phpmyadmin

           </Directory>

For further security we restrict the use of phpmyadmin to only be accessible through HTTPS rather than plain HTTP and redirect any HTTP access to HTTPS:


  
    
           # redirect
https://Site_Name/phpmyadmin to
https://Site_Name/phpmyadmin

             
redirect /phpmyadmin
https://Site_Name/phpmyadmin

Then access to phpmyadmin is further restricted to a specific IP address or range see (https://httpd.apache.org/docs/
for further details about the "allow, deny apache directives). As well we require authentication and only members of
the "sysadmin" group are allowed to access the phpmyadmin Web page (and of course they have log on into phpmyadmin).

After having passed the authentication you will have to the use mysql root account to log into phpmyadmin. However later
we will create an "operators" group which we will allow their members to log into phpmyadmin using their own account rather
than using the root account as it is much safer.


  
    
         # restrict access of
phpmyadmin to the sysadmins group

         <Directory
/var/www/webdav/phpmyadmin>

            
Order Deny,Allow

               
Deny From all

               
allow from IP_address, IP_address_range, etc...

             
AuthType Basic

             
AuthName "restricted access
to phpmyadmin"

               
Auth_MySQL_DB
sysadmins

               
Auth_MySQL_Encrypted_Passwords off

              
require group sysadmins

         
</Directory>

Creating the operators and customers groups

The purpose of the "operators" group is to provide a segmented part of the site that they can managed but not the whole site (which can only be managed by the "sysadmins"). Therefore you don't have to create it if you don't want to.

The procedure for creating the "operators" and "customers" groups is almost identical to the procedure for creating the "sysadmins" group.


  
    
      # mysqladmin
-uroot -p create operators

Enter password:

      

# mysqladmin -uroot -p create customers

Enter password:

      

delldebian:/home/dom# mysql -uroot -p

Enter password:

Welcome to the MySQL monitor.  Commands end with ; or \g.

Your MySQL connection id is 181 to server version:
4.0.24_Debian-10sarge1-log

      

Type 'help;' or '\h' for help. Type '\c' to clear the buffer.

      

mysql> use operators

Database changed

mysql> create table mysql_auth

    -> (

    -> username char(50) not null,

    -> passwd char(25),

    -> groups char(25)

    -> );

Query OK, 0 rows affected (0.01 sec)

      

mysql> create unique index mysqlauthix1 on mysql_auth(username);

Query OK, 0 rows affected (0.02 sec)

Records: 0  Duplicates: 0  Warnings: 0

      

mysql> grant select on operators.* to apache@localhost identified by
'1pach2';

Query OK, 0 rows affected (0.00 sec)

      

mysql> insert into mysql_auth (username, passwd, groups) values
('operator','4p2r1t4r','operators');

Query OK, 1 row affected (0.00 sec)

      

mysql> use customers

Database changed

mysql> create table mysql_auth

    -> (

    ->  username char(50) not null,

    ->  passwd char(25),

    ->  groups char(25)

    ->  );

Query OK, 0 rows affected (0.01 sec)

      

mysql> create unique index mysqlauthix1 on mysql_auth(username);

Query OK, 0 rows affected (0.02 sec)

Records: 0  Duplicates: 0  Warnings: 0

      

mysql> grant select on customers.* to apache@localhost
identified by
'1pach2';

Query OK, 0 rows affected (0.00 sec)

      

mysql> insert into mysql_auth (username, passwd, groups) values
('joe','bl4g','customers');

Query OK, 1 row affected (0.00 sec)

Once you have created the "operators" and "customers" databases, we need to grant the members of the "sysadmins" group the privileges to administer to the operator and customer database and also grant the members of the "operators" group the privileges to administer to the customer database.


  
    
      mysql> use
mysql

Reading table information for completion of table and column names

You can turn off this feature to get a quicker startup with -A

      

Database changed

mysql> grant all on operators.* to admin@localhost identified by
'1dm3n';

Query OK, 0 rows affected (0.01 sec)

      

mysql> grant all on customers.* to admin@localhost identified by
'1dm3n';

Query OK, 0 rows affected (0.00 sec)

      

mysql> grant all on customers.* to operator@localhost identified by
'4p2r1t4r';

Query OK, 0 rows affected (0.00 sec)

Repeat the same grant process for every member of the "sysadmins" or "operators" group you are adding to either databases. This grant process also allow members of the "sysadmins" and "operators" groups to log into phpmyadmin

Now that we have the "operators" and "customers" databases we can allow the members of the "operators" group to manage their segmented part of the site and the list of customers which are allowed to download files.

Allowing the "operators" to manage part of the site

As always see the example below for the updated site configuration file, with the added directives in red and the removed/commented out in blue. Pay particular attention the "Auth_MySQL_DB"directive, making sure that the correct database is specified. Otherwise this will result in failures to log on.


  
    
      <VirtualHost
      WEB_server_IP_address:80>

      

    Servername testwebdav.lansa.co.uk

    Documentroot /var/www/webdav

      

     # Hide restricted access to phpmyadmin

        <Directory
/var/www/webdav>

            
IndexIgnore phpmyadmin

        </Directory>

      

     # redirect https://Site_Name/phpmyadmin to https://Site_Name/phpmyadmin

        redirect /phpmyadmin https://Site_Name/phpmyadmin

      

</VirtualHost>

      

<VirtualHost WEB_server_IP_address:443>

      

    Servername testwebdav.lansa.co.uk

    Documentroot /var/www/webdav

    CustomLog /var/log/apache2/access.log combined

      

    <IfModule mod_ssl.c>

        SSLEngine on

        SetEnvIf User-Agent
".*MSIE.*" nokeepalive ssl-unclean-shutdown

    </IfModule>

      

   # restrict access to phpmyadmin

   <Directory /var/www/webdav/phpmyadmin>

       Order Deny,Allow

          Deny From all

          allow from IP_address, IP_address_range, etc...

        AuthType Basic

        AuthName "restricted access
to phpmyadmin"

          # Auth_MySQL_DB
sysadmins

          Auth_MySQL_DB operators

         
Auth_MySQL_Encrypted_Passwords off

          # require group
sysadmins

          Require group
operators

    </Directory>

      

     # give admins full access to the WebDAV root
directory

     # upload is unlimited

    <Directory /var/www/webdav>

        DAV On

        # DAVSATMaxAreaSize: the
size is specificed in kBytes

        # since each blocks are 4K
each

        # add about 50K above the
limit wanted

        # DAVSATMaxAreaSize 150

        AuthType Basic

        AuthName "test"

           
<Limit PUT POST DELETE PROPFIND PROPPATCH MKCOL COPY MOVE LOCK
UNLOCK>

               
Auth_MySQL_DB sysadmins

               
Auth_MySQL_Encrypted_Passwords off

               
      # Require user admin

               
      Require group sysadmins

           
</Limit>

    </Directory>

      

          # Give
operators full access to the operator
directory

    # but not to the parent directory

          #
upload is limited with quota (DAVSATMaxAreaSize)

         
<Directory /var/www/webdav/downloads>

             
DAV On

             
# since blocks are 4K each
add

             
# about 50K above the limit

             
# limit upload size to 2
Gigs (2 000 000K)

             
DAVSATMaxAreaSize 2000050

             
AllowOverride None

             
Options None

             
AuthType Basic

             
AuthName "Restricted access
to the downloads directory"

                 
<Limit GET PUT POST DELETE PROPFIND PROPPATCH MKCOL COPY MOVE LOCK
UNLOCK>

                     
Auth_MySQL_DB operators

                     
Auth_MySQL_Encrypted_Passwords off

                     
Require group operators #!! if you copy this make sure the correct DB
is used (Auth_MySQL_DB)

                 
</Limit>

          
</Directory>

      

</VirtualHost>

Once you have updated the site configuration file, reload apache 2 and restart your WebDAV session. In your browser, select "File" => "Open" and open this URL:


  
    
      https://WEB_server_IP_address/downloads

replacing "WEB_server_IP_address" with the IP address of your server or its FQDN (and don't forget to tick the check box next to "Open as Web Folder").

This time when you are prompted for a user name and password, use the "operator" account that was created earlier. Once in your WebDAV session as an "operator", create the directory "restricted" (right click and select "New => Folder"). We will use that directory to host files which only authorized customers.will be able to download.

Allowing customers to download files from the restricted part of the site.

Restricting access to the "restricted" directory is a very much simplified version of the WedDAV directive section that was created earlier (added directives shown below in red).


  
    
      <VirtualHost WEB_server_IP_address:80>

      

    Servername testwebdav.lansa.co.uk

    Documentroot /var/www/webdav

      

    # Hide restricted access to phpmyadmin

    <Directory /var/www/webdav>

        IndexIgnore phpmyadmin

    </Directory>

      

    # redirect https://downloads.lansa.co.uk/phpmyadmin
to https://downloads.lansa.co.uk/phpmyadmin

    redirect /phpmyadmin
https://delldebian.lansa.co.uk/phpmyadmim

      

          #
restricted access to "/downloads/restricted" directory

          # require
authentication against list of customers

         
<Directory /var/www/webdav/downloads/restricted>

             
AuthType Basic

             
AuthName "Restricted download accesss"

             
Auth_MySQL_DB customers

             
Auth_MySQL_Encrypted_Passwords off

             
require group customers

         
</Directory>

      

      

</VirtualHost>

      

<VirtualHost WEB_server_IP_address:443>

      

    Servername testwebdav.lansa.co.uk

    Documentroot /var/www/webdav

    CustomLog /var/log/apache2/access.log combined

      

    <IfModule mod_ssl.c>

        SSLEngine on

        SetEnvIf User-Agent
".*MSIE.*" nokeepalive ssl-unclean-shutdown

    </IfModule>

      

   # restrict access to phpmyadmin

   <Directory /var/www/webdav/phpmyadmin>

       Order Deny,Allow

          Deny From all

          allow from
10.44.10.1

        AuthType Basic

        AuthName "restricted access
to phpmyadmin"

          # Auth_MySQL_DB
sysadmins

          Auth_MySQL_DB
operators

         
Auth_MySQL_Encrypted_Passwords off

          # require group
sysadmins

          Require group
operators

    </Directory>

      

     # give admins full access to the WebDAV root
directory

     # upload is unlimited

    <Directory /var/www/webdav>

        DAV On

        # DAVSATMaxAreaSize: the
size is specificed in kBytes

        # since each blocks are 4K
each

        # add about 50K above the
limit wanted

        # DAVSATMaxAreaSize 150

        AuthType Basic

        AuthName "test"

           
<Limit PUT POST DELETE PROPFIND PROPPATCH MKCOL COPY MOVE LOCK
UNLOCK>

               
Auth_MySQL_DB sysadmins

               
Auth_MySQL_Encrypted_Passwords off

               
# Require user admin

               
Require group sysadmins

           
</Limit>

    </Directory>

      

    # give operators full access to the operator
directory

    # but not to the parent directory

    # upload is limited with quota (DAVSATMaxAreaSize)

    <Directory /var/www/webdav/downloads>

        DAV On

        # since blocks are 4K each
add

        # about 50K above the limit

        # limit upload size to 2
Gigs (2 000 000K)

        DAVSATMaxAreaSize 2000050

        AllowOverride None

        Options None

        AuthType Basic

        AuthName "Restricted access
to the downloads directory"

           
<Limit GET PUT POST DELETE PROPFIND PROPPATCH MKCOL COPY MOVE LOCK
UNLOCK>

               
Auth_MySQL_DB operators

               
Auth_MySQL_Encrypted_Passwords off

               
Require group operators #!! if you copy this make sure the correct DB
is used (Auth_MySQL_DB)

           
</Limit>

     </Directory>

      

</VirtualHost>

Once you have updated the site configuration file and reloaded apache 2, open the following URL (replacing "WEB_server_IP_address" with the IP address of your server or its FQDN):


  
    
      https://WEB_server_IP_address/downloads/restricted

Then when you are prompted for a user name and password, use the "customer" account that was created earlier.


  
    
      Note: as you may have noticed from the above URL, you
need to specify the full path including the name
of the directory for which the authentication is performed. This
is because the restriction directive has the
effect of  hiding that directory.

Allowing customers to upload files

Allowing customers to upload files is fairly easy to achieve and uses more or less the same configuration as the "operators" section. First, create the upload directory:


  
    
      # mkdir
/var/www/webdav/upload

# chown www-data:www-data /var/www/webdav/upload

(you can also easily do this via a WebDAV session if you're logged in as admin). Next, modify the site configuration file (added directives shown below in red).


  
    
      <VirtualHost WEB_server_IP_address:80>

      

    Servername testwebdav.lansa.co.uk

    Documentroot /var/www/webdav

      

    # Hide restricted access to phpmyadmin

    <Directory /var/www/webdav>

        IndexIgnore phpmyadmin

    </Directory>

      

    # redirect https://downloads.lansa.co.uk/phpmyadmin
to https://downloads.lansa.co.uk/phpmyadmin

    redirect /phpmyadmin
https://delldebian.lansa.co.uk/phpmyadmim

      

    # restricted access to "/downloads/restricted"
directory

    # require authentication against list of customers

    <Directory
/var/www/webdav/downloads/restricted>

        AuthType Basic

        AuthName "Restricted
download accesss"

        Auth_MySQL_DB customers

       
Auth_MySQL_Encrypted_Passwords off

        require group customers

    </Directory>

      

      

</VirtualHost>

      

<VirtualHost WEB_server_IP_address:443>

      

    Servername testwebdav.lansa.co.uk

    Documentroot /var/www/webdav

    CustomLog /var/log/apache2/access.log combined

      

    <IfModule mod_ssl.c>

        SSLEngine on

        SetEnvIf User-Agent
".*MSIE.*" nokeepalive ssl-unclean-shutdown

    </IfModule>

      

   # restrict access to phpmyadmin

   <Directory /var/www/webdav/phpmyadmin>

       Order Deny,Allow

          Deny From all

          allow from
10.44.10.1

        AuthType Basic

        AuthName "restricted access
to phpmyadmin"

          # Auth_MySQL_DB
sysadmins

          Auth_MySQL_DB
operators

         
Auth_MySQL_Encrypted_Passwords off

          # require group
sysadmins

          Require group
operators

    </Directory>

      

    # give operators full access to the operator
directory

    # but not to the parent directory

    # upload is limited with quota (DAVSATMaxAreaSize)

    <Directory /var/www/webdav/downloads>

        DAV On

        # since blocks are 4K each
add

        # about 50K above the limit

        # limit upload size to 2
Gigs (2 000 000K)

        DAVSATMaxAreaSize 2000050

        AllowOverride None

        Options None

        AuthType Basic

        AuthName "Restricted access
to the downloads directory"

           
<Limit GET PUT POST DELETE PROPFIND PROPPATCH MKCOL COPY MOVE LOCK
UNLOCK>

               
Auth_MySQL_DB operators

               
Auth_MySQL_Encrypted_Passwords off

               
Require group operators #!! if you copy this make sure the correct DB
is used (Auth_MySQL_DB)

           
</Limit>

     </Directory>

      

          # allow
customers full access to the upload directory

          # but not
to the parent directory

          # upload
is limited with quota (DAVSATMaxAreaSize)

         
<Directory /var/www/webdav/upload>

             
DAV On

             
# since blocks are 4K each add

             
# about 50K above the limit

             
# limit upload size to 200 Megs (200 000K)

             
DAVSATMaxAreaSize 200050

             
AllowOverride None

             
Options None

             
AuthType Basic

             
AuthName "Restricted access to the upload directory"

                 
<Limit GET PUT POST DELETE PROPFIND PROPPATCH MKCOL COPY MOVE LOCK
UNLOCK>

                     
Auth_MySQL_DB customers

                     
Auth_MySQL_Encrypted_Passwords off

                     
Require group customers #!! if you copy this make sure the correct DB
is used (Auth_MySQL_DB)

                 
</Limit>

          
</Directory>

      

</VirtualHost>

Once you have updated your site configuration file, reload apache 2 and restart your WebDAVsession. In your browser, select "File" => "Open" and open the following URL:


  
    
      https://WEB_server_IP_address/upload

replacing "WEB_server_IP_address" with the IP address of your server or its FQDN (and don't forget to tick the check box next to "Open as Web Folder").

Then when you are prompted for a user name and password, use again the "customer" account.


  
    
      Note: with the above configuration, any customers with a
valid user name and password will be able to upload, download,
rename and delete files in the upload directory.

Using phpmyadmin to allow the people in the operators group to manage the list of allowed customers

Managing the list of customers using phpmyadmin is fairly easy. However for those of you not familiar with phpmyadmin, here a quick tutorial on how to do it. Open the following URL in your Web browser:


  
    
      https://WEB_server_IP_address/phpmyadmin

replacing "WEB_server_IP_address" with the IP address of your server or its FQDN.

Then when you are prompted for a user name and password, use the "operator" account to get past the authentication at the Web server level. Subsequently you will be presented with the phpmyadmin login screen and once again use the "operator" account to login.

Once logged into phpmyadmin, click the "customers" database and the "browse" icon (1st from the left) under the "Action" menu. From there you can add a customer by clicking "Insert new row", edit their details (password change, etc...) by clicking the "Edit" icon (pencil icon) or delete them by clicking the "Delete" icon (red cross icon) and if you want to disable and account either edit its details or delete it.

Lastly, remember the following (which, actually can be used to disable an account):

user name, password and groups are case sensitive
make sure that every customer is part of the "customers" group and likewise any operators are part of the "operators" group.

Any issue with the above two items will prevent successful logins.

Credits

I should give credit and thanks to the following; without them I would never have been able to achieve my project:

Saqib Ali's "Apache based WebDAV server with LDAP for authentication and SSL" HOWTO (https://www.tldp.org/HOWTO/Apache-WebDAV-LDAP-HOWTO/)
https://bignosebird.com/notebook/mysqlauth.shtml
https://www.twilight-systems.com/flacco/mozcal/mozcal-webdav-apache2-rh9.html
Nate Carlson's IPSec using Openswan "Howto" (https://www.natecarlson.com/linux/ipsec-x509.php)

Footnote, comments/suggestions

I invite all comments and suggestion for improving this HOWTO. Please feel free to drop me a line at dom2319@yahoo.co.uk.

Talkback: Discuss this article with The Answer Gang

[BIO]

I was born in France and moved to the UK in 1993 - and, believe it or not, have loved it ever since.

Back in 1998, a work colleague suggested I look at Linux when it was just barely a buzz. Something to do in my spare time. I got myself a book with a copy of RH 5.0. A few weeks later Mandrake came out, and I've been hooked on it ever since.

In the recent years, I switched to Debian, and those days the Debian boxes pop up everyhwhere in the company I admin the network for. I use it for Web servers, VPN-firewalls, routers, etc... but that's never enough, as it even made it on our iSeries (also know as AS/400).

In my free time I like snowboarding, listening to house music, and getting a foot into the paranormal.

Copyright © 2006, Dominique Cressatti. Released under the Open Publication license unless otherwise noted in the body of the article. Linux Gazette is not produced, sponsored, or endorsed by its prior host, SSC, Inc.

Published in Issue 131 of Linux Gazette, October 2006

<-- prev | next -->